Astralpool QG50 Manual del usuario - Página 10

Navegue en línea o descargue pdf Manual del usuario para Aspirador de piscinas Astralpool QG50. Astralpool QG50 16 páginas. Robotic pool cleaner

Grasp the handle and lift up to remove the filter

canister (Figure 18).

Figure 18. Remove the Filter Canister

Press the interior latch and remove the filter canister

lid (Figure 19).

Figure 19. Remove Filter Canister Lid

Using a hose with clean water, rinse the filter canister

and lid to remove all debris (Figure 20).

Figure 20. Rinse the Filter Canister

QG50 robotic cleaner

Replace lid on the canister and then replace canister

back into the cleaner body.

Plug the power cord back into the control unit and

store the cleaner out of direct sunlight for next use.

4.5

Store the Cleaner When Not in Use

The cleaner must be cleaned regularly using slightly

soapy clean water. Do not use solvents such as

trichlorethylene or its equivalent. Rinse the cleaner

generously using clean water. Do not let your cleaner

dry in direct sunlight near the pool.

Disconnect cleaner from the power source.

Starting at the cleaner head, remove all coils and

tangles from the floating cable (Figure 21). Lay the

cable in the sun to loosen any tangling memory.

Disconnect the cable from the control unit. Replace

the protective cap on the control unit.

Figure 21. Untangle the Floating Cable

Loosely coil the floating cable starting at the cleaner

and moving toward the connection point at control

unit.

WARNING

To avoid electric shock and other hazards which

could result in permanent injury or death, disconnect

(unplug) the cleaner from the power source before

performing any cleaning and maintenance.

5.1

For optimal patterning and reduced tangling, the

floating cable should enter the water near the middle

of the pool length (see Figure 22). Spread all of the

floating cable carefully in the pool, ensuring there are

no kinks or coils.

owner's Manual