Cognex DataMan 200 Manual de instalación - Página 3

Navegue en línea o descargue pdf Manual de instalación para Lector de códigos de barras Cognex DataMan 200. Cognex DataMan 200 4 páginas. Liquid lens module

Imprimir página
Liquid Lens Module Installation
4
Grip the ring
firmly and pull
until it separates.
5
Remove the supplied sleeves from the enclosed bag and insert
them into the designated locations on the reader.
A
B
4 DataMan 200 Liquid Lens Installation Guide
Retain the focus
ring for future
use.
 
Do not turn
the lens with
the focus ring
removed.
6
7
Replace the front cover.
3
2
Tighten screws in order shown. Maximum
torque for the cover screws is 9 N-cm (0.8
pound-inch).
1
4
Use the Focus Settings pane in the Setup Tool to configure the liquid
lens for your production environment, which typically supports a
reading range between 40mm - 250mm. Individual liquid lens modules
may support a larger range. Contact your Cognex sales representative
for details.
DataMan 200 Liquid Lens Installation Guide
Insert the pins of the
liquid lens module through
the sleeves and into the
DataMan reader.
5