Astrapool Dual Pure 40 Manual - Página 14

Navegue en línea o descargue pdf Manual para Equipos de iluminación Astrapool Dual Pure 40. Astrapool Dual Pure 40 20 páginas. Salt electrolysis and ph regulation

Imprimir página
To find a specific program:
Use the drop-down Menu:
-
Press Menu: DUR appears
-
Press
until the desired program is displayed.
Add salt:
Check the salt content. If the concentration is less than 4 g/l, add salt according to the following
formula:
Q = (4-T) x V
Always stop the device before adding salt directly to the pool.
Wait for the salt to dissolve before turning the salt chlorinator on again.
Adding chemical products:
Always stop the device before adding chemical products directly to the pool. Wait for the chemical
products to dissolve before turning the salt chlorinator on again.
Presence of hydrogen peroxide: This product cancels the chlorine reading for approximately 3 weeks.
The sterilizer produced by your chlorinator is compatible with most swimming-pool water treatment
products, with the exception of those containing PHMB polymers. In all cases, stop the chlorinator
while you add products and until they have been completely dissolved.
Winter months:
If the filtration of the pool is maintained during the winter months, we recommend turning the
chlorinator off when the temperature falls below 15°C.
Encrusted electrode:
The electrode must have a clean appearance without limescale encrustations. If need be, de-scale
the electrode by placing it in a solution containing 80% water and 20% chlorhydric acid. Then check
why the electrode got encrusted:
Salt concentration too low
Polarity inversion time is too long
Electrode wearing out (see following paragraph)
Unit inversion fault
Upon immersion of the electrode for scaling, do immerse further than the resin!
Q = quantity of salt to be added in Kg
4 = salt content to be respected
T = measured salt content in the pool
V = volume of the pool in m3
14
Número de revisión
Rev 001-2013-08-06
ENGLISH