AmerTac Zenith ZB210 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Mando a distancia AmerTac Zenith ZB210. AmerTac Zenith ZB210 17 páginas. Amertac zb210 universal remote control owner’s manual

Imprimir página

Setup, cont.

Code Search by Brand

Lets you search for a code for a specific Brand within

the Code Library for a particular manufacturer.

1. Turn on the device (TV, SAT, CBL) to be controlled.

2. Press and hold the SETUP button until the red

indicator remains on, then release SETUP button.

3. Press and quickly release the desired mode button

(TV, SAT/CBL). The red indicator blinks off once.

4. Press and release the numeric button (0-9)

corresponding to desired Manufacturer (see table

below). The red indicator blinks off once. Note,

pressing "0" performs a full library search same as

normal Code Search Method on previous page.

5. Press the CHANNEL UP button repeatedly until the

device to be controlled changes channel. The red

indicator blinks off with each button press. If you

accidentally overshoot the code required, press the

CHANNEL DOWN button to backtrack through the

library until the device changes channel. Pressing

CHANNEL UP changes direction to forward again.

6. Press and release MUTE to install the code.

Brand Search Method entry is now complete.

Note: When all codes under a Brand have been searched

the red indicator flashes rapidly for 3 seconds.

RCA, GE, SA

Zenith

Philips, Magnavox

Sony, Panasonic, Toshiba, Sharp, Pioneer

LG, Samsung, Hitachi, JVC, Sanyo

Echostar, Sylvania, Dish, Emerson, Fisher, Hughes

All

Setup, cont.

Any Mode chosen for Volume/Mute control MUST have

its own Volume/Mute function or the Volume/Mute

buttons will do nothing.

Setting ALL Volume/Mute Control to any one Mode

This routine can set all Modes to "punch-through" to

any one chosen Mode for Volume/Mute button control

without the needing to change to that Mode.

1. Press and hold the SETUP button until the red

indicator turns on, then release the button.

2. Press and hold the MUTE button until the red

indicator blinks off, then release the button.

3. Press and release the desired Mode button (TV,

SAT/CBL) for Volume/Mute control, the red

indicator blinks then stays on.

4. Press and release the MUTE button and the red

indicator turns off. The red indicator will blink

rapidly for three seconds if the Mode you have

selected has no Volume/Mute control.

5. All other Modes will now punch-through to your

chosen Mode for Volume/Mute control.

Setting any Mode to use its own Volume/Mute Control

This routine can set any Mode to use only its own

Volume/Mute control. Note - If your chosen Mode has

no Volume/Mute functions of its own then the Volume/

Mute buttons will do nothing.

1. Press and hold the SETUP button until the red

indicator turns on, then release the button.

2. Press and hold the MUTE button until the red

indicator blinks off, then release the button.

3. Press and release the desired Mode button (TV,

SAT/CBL), the red indicator blinks then stays on.

4. Press and release the VOLUME- (Down) button, the

red indicator blinks then stays on.

5. Press and release the MUTE button and the red

indicator turns off.