AmerTac ZH101 Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Mando a distancia AmerTac ZH101. AmerTac ZH101 12 páginas. Universal tv remote

Code Search

If you cannot find a 4-digit code in the Code Table that

operates your TV, try searching for the code as follows:

1. Manually turn on the TV to be controlled.

2. Press and hold the Power and Mute buttons until the

red indicator remains on.

3. Release the buttons.

4. Press the Power button to begin code search.

5. Press the Channel Up (CH+) button (or Power

button) repeatedly until the TV changes channel (or

turns off). You might have to press the button 200

times or more to find your code. If you accidentally

overshoot the code required, press the Channel Down

(CH-) button, to backtrack through the code library

until the TV changes channel.

6. Press and release Mute to save the code. Code search

is now complete. Write down your code in the box in

the previous page.

Note: Code search starts from the currently stored 4-

digit number.

Code Identification

To determine the code installed in the remote:

1. Press and hold Power and Mute at the same time

until the red indicator remains on.

2. Release the Power & Mute buttons.

3. Press and hold the Power & Mute buttons until the

Visible indicator blinks and remains on.

4. Release the Power & Mute buttons.

5. To find the first digit of the four-digit code, press

and release CH- and count the number of indicator

blinks. Note: No blink indicates a "0" digit. To find

the second digit, press and release the V- and count

the number of indicator blinks. To find the third digit,

press and release the CH+ and count the number of

indicator blinks. To find the fourth digit, press and re-

lease the V+ key. This time, the indicator will remain

off once the fourth digit blinks are completed.

6. Code Identification is now complete and remote

operation returns to normal.