Dop Choice L2.0016160 Instrucciones de uso - Página 2

Navegue en línea o descargue pdf Instrucciones de uso para Equipos de iluminación Dop Choice L2.0016160. Dop Choice L2.0016160 2 páginas.

Imprimir página

SET UP THE OCTA 5 & 7

OPERATING INSTRUCTIONS – BEDIENUNGSANLEITUNG

ONLY OCTA 7

1.) Unpack and unfold the

SNAPBAG

OCTA.

3.) Release the Velcro

strips.

DoPchoice GmbH · Machtlfinger Str. 21 · 81379 Munich (Germany)

T +49 89 95 45 742-40 · [email protected] · www.dopchoice.com

2.) Push the rod extensions to the front and connect them

to the other rod-end.

4.) Push in the 2 upper rods first to the RABBIT-EARS

continue with all other rods.

5.) Attach the Velcro

strips to the end of the SNAPBAG

Make sure the SNAPBAG

is on full tension by utilizing

the Velcro

strips before installing the diffusor.

6.) Mounting Point for the safety Cable

Always secure every accessory with a suitable safety cable

from falling when the primary mounting method fails.

Safety cable

DISASSEMBLE THE OCTA 5 & 7

OPERATING INSTRUCTIONS – BEDIENUNGSANLEITUNG

2.) Release the Velcro

strips to take off the

tension on the rods.

–

4.) Release the rod extensions and pull them back to the

very end of the white elastics.

ONLY OCTA 7

6.)

Important:

the rod extensions must be pulled back to the

very end in order to fold the SNAPBAG

DoPchoice GmbH · Machtlfinger Str. 21 · 81379 Munich (Germany)

T +49 89 95 45 742-40 · [email protected] · www.dopchoice.com

1.) Take off the diffusor, fold it together and

put it back into the plastic bag.

3.) Pull out the rod ends on the RABBIT-EARS

start with the lower ones first.

ONLY OCTA 7

5.) Fold the SNAPBAG

as shown in the picture.

7.) Put the SNAPBAG

as shown in the picture!

designated transportation bag.

–

together

back into the