Ames Instruments 64170 Manual del usuario e instrucciones de seguridad - Página 7

Navegue en línea o descargue pdf Manual del usuario e instrucciones de seguridad para Instrumentos analíticos Ames Instruments 64170. Ames Instruments 64170 13 páginas. Digital video inspection camera

Installing/Replacing Batteries

CAUTION! Do not mix old and
new batteries. Do not mix alkaline,
standard (carbon-zinc), or rechargeable
(nickel-cadmium) batteries. Position
batteries in proper polarity. Do not
use swollen or leaking batteries.
The battery compartment is located
on the bottom of the handle.
1.
Slide the Battery Cover off, remove the
battery case, then insert batteries.

Tool Set Up

TO PREVENT SERIOUS INJURY FROM ELECTRICAL SHOCK:
Make sure that the Camera is OFF before performing any procedure in this section.
1.
Connecting Cable:
a. Carefully push Cable's key
into Cable Connector's slot.
b. Turn Cable Connector
counterclockwise until the
Cable and Cable Connector
are securely attached.
2.
Disconnecting Cable:
a. Turn Cable Connector clockwise
until the Cable and Cable
Connector are detached.
b. Remove Cable.
Cable
Connector
3.
Micro SD Card
a. Insert the Micro SD Card into the
Memory Card Slot, then push down
on the card until it clicks into place.
Note: When the card is installed, the
icon will appear on the Display Screen.
b. To remove card, push down on the
card until it pops up, then remove.
Item 64170
Slot
Key
Cable
For technical questions, please call 1-888-866-5797.
2.
Slide the battery case back in and
replace the Battery Cover.
4.
Attaching Accessories:
a. Hold the accessory against
the Imager Head, placing
the Hook in the hole.
b. Match the slot on the Sleeve
to the accessory, then slide the
Sleeve down the Imager Head
until it covers the Hook.
5.
Connecting to Computer with
USB to Mini-B Cable:
Plug the Mini-B end into the Mini-B Port,
then plug the USB end into a computer.
6.
Connecting to External
Monitor with RCA Cable:
SD
Plug one end into the RCA Video
Out Port, then plug other end into
RCA Video In Port on monitor.
Sleeve
Accessory
Hook
Imager
Head
Page 7