Flycam FLCM-RK-AB Manual de montaje - Página 6

Navegue en línea o descargue pdf Manual de montaje para Accesorios para cámaras Flycam FLCM-RK-AB. Flycam FLCM-RK-AB 11 páginas. Arm brace support



Insert your camera setup with Quick Release

Plate into Adapter and tighten the lever back.

NOTE: If you wish to bypass Quick Release Plate, the camera can be directly attached to Head Plate by

following this assembly sequence:



Remove Head plate from 3-piece Head

Assembly in order to attach it to your camera.

You will note a number of mounting holes

that can be used to adapt various cameras.



Keep the camera in center of Head Plate and

secure it properly. Do not over tighten this

adjustment as it can break the threaded

insert.

The many slots located on Head Plate and Bottom Plate allows you to easily adjust X & Y Axis for perfect

balance. Place the assembly in line with center of stabilizer post and tighten the side adjusters, as shown.

Further fine tuning will probably be required.

Head Plate X adjustment

Head Plate Y adjustment

Adding Weights & Positioning for Proper Balance

Continuing the assembly and balance requirements to make your Flycam Handheld Video Stabilizer fully

functional you will note that the base platform has a provision to mount the balance weights in their cups

via a slot found on both sides of the post.

The purpose of the counter weight system is to match the low end of the stabilizer to the weight of the

camera and accessories at the high/top end with the gimbaled handle as the pivot point in between.