Flycam HD-5000 Manual de montaje - Página 3

Navegue en línea o descargue pdf Manual de montaje para Accesorios para cámaras Flycam HD-5000. Flycam HD-5000 10 páginas. Video stabilizer
También para Flycam HD-5000: Manual de instrucciones (11 páginas), Manual de instrucciones (16 páginas)

Imprimir página

HD-5000 Stabilizer Setup



Insert M6 Screw (Part-8) at both side of

base platform (Part-3) then insert the wash-

er to hold the bolt at one place.

Adding Weights & Positioning for Proper Balance



Put the weights (Part-4) according to the

weight of the camera and lock with the

screw caps (Part-9) at both side of base

platform.



On base platform (Part-2) is made by loos-

ening the retaining screws and moving

counterweight plates (Part-4) closer to or

farther

away

from

re-tightening. You will probably need to ad-

just and re-adjust the horizontal position to

achieve optimum performance.

The purpose of the counter weight system is to match the low end of the stabilizer to the weight of the

camera and accessories at the high/top end with the gimbaled handle as the pivot point in between.

The heavier the camera and accessories, the more weights are required to achieve proper balance. Gen-

erally as you add weight to one side of the central post, an equal amount has to be added to the other

side to maintain horizontal balance.

However if you are using an offset configuration such as a flip out viewfinder or off center accessories,

extra weights might be needed on the opposite side of the post to counter act and maintain proper bal-

ance.

Total weight fixed to the base platform should be equal to the weight of your camera plus the head and

any accessories.

post

and

then