doping S7 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Altavoces doping S7. doping S7 6 páginas.

Imprimir página

3. Adjust the volume level of music and microphone. When using Bluetooth mode or Line in

mode, also adjust volume on your mobile device or external player.

Recording from microphone to USB flash drive

• The maximum length of the recorded material depends on the capacity of the memory

device.

• Records will be saved in the JL_REC folder.

1. Turn off the sound system with the switch OFF/ON (17).

2. Insert the USB flash drive into the USB socket (14).

3. Turn the main volume control VOL 1 (1) to the minimum. Use the key ECHO (3) to set the

echo level to minimum.

4.Move the microphone switch to the ON position.

4.1 Insert the microphone connector into the MIC 1 or MIC 2 port.

5. Turn on the sound system with the switch OFF/ON (17).

• If the sound system is in another mode, press the key [MODE] (6), turn on the Music

mode.

6. Press the [RECORD] (5) button and hold it, until two sound signals are produced.

7. Speak into the microphone.

• Press the [RECORD] button and release it to stop the recording, and then press the

[RECORD] button and release it again to continue the recording.

8. To end the recording, press the [RECORD] (5) button and hold it. The recording will be saved

on the flash drive.

• If the recording fails, make sure that the flash drive still has a free space.

Playback of the microphone recordings

After completion of the recording, the last recording will be played automatically. If you want to

play other microphone records, press the key [

To exit the microphone recording playback mode, press the RECORD (5) button and release it.

• To play microphone recordings back, press the RECORD (5) button and release it in

Music mode.

• To exit the microphone recording playback mode, press the RECORD (5) button and

release it; MP3 track playback will start.

Lighting effects:

Front panel of the device may be lit with multicoloured LED diodes.

These light effects may be switched on/off by pressing the key [LIGHT] (2).

This is a complex device and it must be treated carefully. For device to serve for a long time and

trustworthy, please take into consideration the following:

1. Do not place the device in a very hot place (over 40˚C). In heat, electronic devices and

batteries damage faster and plastic details can even become deformed.

2. make sure the device is not in contact with water and any other liquids.

3. Do not draw the device near powerful sources of electric field and static electricity.

4. Do not arbitrarily open the device and repair it.

5. Do not insert non-standard, unqualified or broken spare parts, accessories, batteries in the

device.

] (7).



PROVISIONS FOR PROPER USE

- 5 -

3510005