Akw T301 Instrucciones de instalación, mantenimiento y uso - Página 14

Navegue en línea o descargue pdf Instrucciones de instalación, mantenimiento y uso para Productos de fontanería Akw T301. Akw T301 16 páginas. Basin mixer valve

Imprimir página

Record Comminsioning Tests

Note: All installation, commissioning and in-service testing must be undertaken

by a suitably qualified engineer.

Commissioning Tests

Record the following information to provide a performance reference point for

future in-service tests.

Date of Comissioning

Max temperature is set to- (Factory Setting 41°C)

Temperature of hot water supply

Temperature of cold water supply

Temperature of mixed water at the largest draw-off flow rate

Temperature of mixed water at the smallest draw-off flow rate

Mains water supply running pressure (within range 0.5-10 bar)

With T301 turned on at max flow and max temperature setting, record the

water temperature when it is stabilized

Record details of test equipment (brand, model, serial number and calibration

information) used to provide the above information, if necessary record on

back page:

.................................................................................................................................................

Please use same test equipment as previously used for commissioning test.

Date of future servicing

Record Max Temperature

Serviced by

.......... | .......... | ..........

...........°C

.........Bar

...........°C