Doran 4100 Manual de funcionamiento y servicio - Página 6

Navegue en línea o descargue pdf Manual de funcionamiento y servicio para Scales Doran 4100. Doran 4100 13 páginas. Digital checkweigh scale

DORAN MODEL 4100 OPERATING AND SERVICE MANUAL

3. DON'T spray high pressure or steam directly onto the load cell-this would cause

irreparable damage.

4. DON'T scratch the shatter proof LEXAN

5. DON'T leave the access panel open or ajar-be sure to torque the 24 bolts

securely.

6. DO select one weight unit to be displayed and the desired tolerance on the

internal program DIP switch.

7. DO check calibration at least semi-annually. Use calibrated weights and follow

the calibration procedure below or call your scale dealer for assistance.

8. DO train all personnel in proper scale use-remember that the 4100 is a precision

instrument and should be treated as such.

Each capacity, from 2 to 1000 pounds, of the 4100 is programed differently. A

custom program chip (EPROM) is used for each capacity. The 4100 must be returned

to the factory should a capacity change be required, since the microprocessor must be

reprogramed and the A/D Converter must be recalibrated.

Refer to the attached Calibration Instructions to calibrate your Doran 4100

Checkweigh Scale. We recommend that this be done semi-annually.

If it becomes necessary to return your scale to us for repair, call first to get return

authorization. Many problems can be handled on the phone, thereby avoiding costly

down time for repair.

Be sure to pack the scale with at least 3 inches of protective packing material all

around if your original packing box is not available. Our shipping address is:

V. CALIBRATION PROCEDURE FOR DORAN MODEL 4100 SERIES SCALES

Each 4100 is equipped with a 'ZERO' adjust pot (VR2), a SPAN dip switch (SW2),

and a fine span adjust pot (VR1).

MAN001R2

faceplate.

DORAN SCALES, INC.

1315 Paramount Parkway

Batavia, IL 60510

PHONE: 630/879-1200

FAX: 630/879-0073