Canon DR-2510M - imageFORMULA - Document Scanner Manual de referencia - Página 3

Navegue en línea o descargue pdf Manual de referencia para Escáner Canon DR-2510M - imageFORMULA - Document Scanner. Canon DR-2510M - imageFORMULA - Document Scanner 36 páginas. Mac os x

Imprimir página

Setup Guide

Although this manual uses the DR-2510M in the descriptions, DR-2010M operations are identical. If you are using the DR-2010M, please read
"DR-2010M" in place of "DR-2510M."

Checking the Accessories

If any of the items listed below are missing or damaged, contact your local authorized
Canon dealer or service representative.
DR-2010M/DR-2510M
Feed Roller
Reference Guide
Registration Card
(this document)
(U.S.A and Canada only)
Third-Party Software
The following software is included on the supplied Setup disc.
● Presto! BizCard
Business card management software from NewSoft Technology Corp.
Run the following installer from the Setup disc to install.
➜ BizCard/BCRInstaller
Remove the scanner from the box, and remove the orange tape and protective sheets (▼) from the scanner.
Please read first.
• Items included in this manual are subject to change
without notice.
• You must keep the machine's packaging and packing
materials for storing or transporting the machine.
USB Cable Type A/Type B
AC Adapter/Power Cord
(Length: 1.8 m)
(Connected length: 2.6 m)
Warranty Card
Setup Disc
(U.S.A and Canada only)
● Presto! PageManager
Photo and document management software from NewSoft Technology
Corp.
Run the following installer from the Setup disc to install.
➜ PageManager/PM8Installer
* Presto! BizCard is a registered trademark of NewSoft Technology Corp.

Installing the Feed Roller

1
Slide the document guides to the left
2
Lift the roller fixing lever a, and slide it to the left b.
and right, and open the roller cover.
Document
guides
Roller cover
3
Insert the feeding roller and align the
4
Slide the roller fixing lever to the right and insert it into the hole on the left of
the feeding roller a. Lower the roller fixing lever to secure the shaft of the
notch on the roller with the shaft on
the unit.
feeding roller b.
5
6
Close the roller cover. It is properly
Gently press on the sides of the front
closed when you hear a click.
unit to close it. It is properly closed
when you hear a click.
Roller fixing lever
☞
Continued on back side