Doran 360SL Manual de instrucciones - Página 4

Navegue en línea o descargue pdf Manual de instrucciones para Equipos de prueba Doran 360SL. Doran 360SL 9 páginas. Programming tool

III. ENTERING DATA INTO THE TOOL

The reason for this is that the tool will grab the first signal that it sees, and it may not be the one

that you are intending to work with. If there are not any trailers within a 50-foot radius you should

not have any trouble using the tool without setting the trailer ID number. If you know your trailer ID

number and have other active SL boosters in the area we suggest that you go to the

SET BOOSTER ID section and enter the Trailer ID number for the ease of reading the correct SL

booster. Power must be applied to the booster to use this feature.

1. Use the up and down arrow keys on the SL tool to select READ INFORMATION FROM

BOOSTER and press the ENTER button.

2. The SL tool will display READING . The SL tool must be within 6 feet of the booster to read

the information.

3. When the SL tool has read and downloaded the information, the screen will display

READ SUCCESS: along with the BOOSTER ID and TRAILER ID of the successfully read

information for your verification (see Figure 1). You can then press the MENU button to return to

the main menu.

4. If the READ SUCCESS: does not occur within 10 or 15 seconds, then the read may be failing

due to interference or the distance is too great. Position the tool closer to the booster and try

again. To terminate the READ function at anytime, press the MENU button.

SET BOOSTER ID: This is the next selection that can be made on the SL tool.

1. Use the up and down arrow buttons to select the SET BOOSTER ID.

2. Press the ENTER button to enter into this programming mode (see figure A).

3. Press the ENTER button, an arrow will be pointing to the Booster ID Number

and the first digit of the Booster ID number will begin to flash. If the Read

Information has been used successfully, the number shown will be the

Booster number read.

4. Enter the 9-digit booster ID number located on the cover of the booster using

the numbers on the tool s keypad.

READ SUCCESS:

001 065 198

TRAILER ID:

001 256

Figure 1

BOOSTER ID:

> 001 001 001

TRAILER ID:

136 987

Figure A