Flying Industry Development 0020794 Manual del usuario

Navegue en línea o descargue pdf Manual del usuario para Mando a distancia Flying Industry Development 0020794. Flying Industry Development 0020794 2 páginas. 1ch wifi rf remote controls switch kit with 30a ac power output for home automation

Imprimir página
1CH WiFi RF remote controls switch kit with 30A AC power output for home automation (Model 0020794)
Package Include:
1 x WiFi to RF Converter (Including power adapter)
1 x Receiver: S1PX-AC
2 x Transmitter: C-2
1 x User manual
Product Introduction:
This intelligent control kit includes a WiFi-RF converter, a receiver, and two remote controls. The receiver has AC power output that can be used to
connect AC devices. The user can use the remote control to control the device connected to the receiver, or use the smart phone to control the
device connected to the receiver anytime and anywhere.
Product Application:
1. It can remote control various AC devices through mobile phones and the Internet. And it applies to industrial, agricultural, commercial and home
automation and other fields. Such as the control of various lighting, fans, solenoid valves and other devices, and the control of security alarm
equipment, factory or farm equipment and vehicle or marine equipment.
2. Especially when the controlled device is in a place without a network, the user can use this product to remote control the device through the mobile
phone and the Internet.
3. This product also has superior timing and delay functions which can achieve a variety of complex timing control, delay control and automatic cycle
control. Therefore, it has richer and smarter control functions than traditional remote controls.
Product Principle:
The WiFi to RF converter is connected to the Internet via the WiFi signal of the wireless router. We use the mobile phone APP to operate the WiFi to
RF converter.
The WiFi to RF converter can learn the signal of RF remote control and control the RF device by emitting the same RF signal.
Through these two principles, the mobile phone can be transformed into a universal remote controller which is enable to remote control various
devices.
Product Usage:
Firstly, we use the mobile phone to download the APP, register an account and log in. Then connect the WiFi to RF converter to a wireless router and
operate the APP to learn the RF signals of buttons "ON" and "OFF" of remote control. Finally, we can use the mobile phone APP to control the device
connected to the receiver.
Feature:
Wireless control, easy to install.
The RF receiver has waterproof case and waterproof connector, it can be installed outdoors.
This RF receiver is AC power supply output; it can be used to operate AC equipments.
High Power: Each channel can work at maximum current 30A, such as 3000W/110V, 6000W/220V.
RF receiver with wired control terminals: You can connect sensors, manual switches or external devices to control the receiver.
You can turn on/ off the controlled device by the transmitter (remote control) from any place within a reliable distance.
You can turn on/ off the controlled device by the smart phone from any place.
WiFi to RF Converter Parameters:
Dimension: 62mm x 62mm x 20mm
Operating voltage: 5V/1A (powered by Micro USB interface)
WiFi operating frequency: 2.4GHz
RF system working distance: 50 to 100 meters (in an open environment)
Working temperature: -40° C~85° C
It can learn up to 4 remote controls and can control up to 16 switches.
Supports the frequency of the learned RF remote controls：433MHz
Most fixed code and learning code remote controls are supported, such as the remote control chip models PT2260, PT2262, PT2264, EV1527 etc.
Dynamic codes (rolling codes) and encrypted remote controls are not supported.
Remote controls of infrared signal such as the remote controls of TV and air-conditioning are not supported.
It can be remotely controlled by mobile phone APP in any place where there is a mobile phone signal.
The Android version of the APP supports a variety of mobile phones or tablet devices of Android systems.
The iOS version of the APP supports a variety of Apple phones or Apple devices such as the iPhone, iPad, and iPod Touch.
APP supports English, French, German, Spanish, Russian and other languages.
Multiple working modes: self-locking, interlocking, delay, ordinary timing, cycle timing and custom scenes.
Receiver Parameters:
Model No.: S1PX-AC
Power Supply (Operating Voltage): AC100~240V (110V/120V/220V/240V)
Output: AC100~240V (110V/120V/220V/240V)
Wire range for the terminals: 22-9 AWG
Working Frequency: 433MHz
Channel: 1 CH
Control Modes: Toggle, Momentary, Latched
Static Current: ≤6mA
SHENZHEN FLYING INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com