Flying Industry Development CWC-3 Manual rápido

Navegue en línea o descargue pdf Manual rápido para Mando a distancia Flying Industry Development CWC-3. Flying Industry Development CWC-3 2 páginas. Rf wireless remote control dc motor controller / transmitter & receiver
También para Flying Industry Development CWC-3: Manual rápido (2 páginas)

Imprimir página
RF Wireless Remote Control DC Motor Controller / Transmitter & Receiver
This is the DC motor controller. The DC motor controller can remote control one DC motor (DC6V/9V/12V/24V) rotates in positive/ reversal
direction. You can connect two restrictive switches to receiver and use them to stop motor rotation.
Package Include:
1 x Receiver: S1F2-DC06 / S1F2-DC09 / S1F2-DC12 / S1F2-DC24
2 x Transmitter: CWC-3
1 x User manual
Features:
Wireless control, easy to install
Control DC motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals with
voltage DC6V / 9V / 12V / 24V.
You can rotate the motor in positive or reversal direction with the transmitter (remote control) from any place within a reliable distance; the
wireless signal can pass through walls, floors and doors.
Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
One/several transmitters can control one/several receivers simultaneously.
If you use two or more receivers in the same place, you can set them with different codes.
Transmitting Frequency: 315MHz / 433MHz
Receiver:
Model No: S1F2-DC06 / S1F2-DC09 / S1F2-DC12 / S1F2-DC24
Coding Type: Fixed code or learning code
Coding Setting: By learning
Power Supply (Operating Voltage): DC6V (S1F2-DC06), DC9V±1V (S1F2-DC09), DC12V±1V (S1F2-DC12), DC24V±1V (S1F2-DC24)
Output: DC6V (S1F2-DC06), DC9V±1V (S1F2-DC09), DC12V±1V (S1F2-DC12), DC24V±1V (S1F2-DC24)
Case Size: 74mm x 54mm x 28mm
Quiescent Current: 5mA
Rated Current: 5A
The Maximum Instantaneous Current of Starting Motor: 10A
Transmitter:
Model No.: 0021102(CWC-3)
Channel: 3 CH
Waterproof
Remote Control Distance: 50m / 300ft (theoretically)
Encode: Fixed code by soldering
Unit Size: 58mm x 30mm x 12mm
Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)
Usage:
Power supply:
Connect power supply DC6V / 9V / 12V / 24V to terminal "INPUT"; connect motor to terminal "OUTPUT". You can exchange the output wires of
motor to change the rotating direction of motor.
Setting control mode Latched: Connect Jumper S1
Function of transmitter:
Press button ▲ on remote: terminal "Output" output DC power, motor rotates in positive direction.
Press button ▼ on remote: terminal "Output" output DC power, motor rotates in reversal direction.
Press button
on remote: motor stops.
Function of manual buttons in receiver:
Press button K3 in receiver: terminal "Output" output DC power, motor rotates in positive direction.
Press button K1 in receiver: terminal "Output" output DC power, motor rotates in reversal direction.
Press button K2 in receiver: motor stops.
Setting control mode Momentary: Connect Jumper S2
Function of transmitter:
Press and hold button ▲ on remote: terminal "Output" output DC power, motor rotates in positive direction. Release button: motor stops.
Press and hold button ▼ on remote: terminal "Output" output DC power, motor rotates in reversal direction. Release button: motor stops.
Function of manual buttons in receiver:
Press and hold button K3 in receiver: terminal "Output" output DC power, motor rotates in positive direction. Release button: motor stops.
Press and hold button K1 in receiver: terminal "Output" output DC power, motor rotates in reversal direction. Release button: motor stops.
Restrictive function:
You can connect two restrictive switches to terminals "X1" and "X2", if the restrictive switch X1 or X2 is connected, the motor will work normally; if
the restrictive switch X1 or X2 is disconnected, the motor will stop automatically. That means when the restrictive switch "X1" is connected, the
motor will work in reversal direction; when the restrictive switch "X1" is disconnected, motor will stop automatically. When the restrictive switch
"X2" is connected, the motor will work in positive direction; when the restrictive switch "X2" is disconnected, motor will stop automatically.
SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com