Flying Industry Development S1F2-DC24 Manual rápido

Navegue en línea o descargue pdf Manual rápido para Mando a distancia Flying Industry Development S1F2-DC24. Flying Industry Development S1F2-DC24 2 páginas. Rf wireless remote control dc motor controller / transmitter & receiver
También para Flying Industry Development S1F2-DC24: Manual rápido (2 páginas)

Imprimir página
RF Wireless Remote Control DC Motor Controller / Transmitter & Receiver
This DC motor controller system includes one transmitter and two controllers. You can use one transmitter to remote control two DC motors
(DC6V/9V/12V/24V) rotation in positive/ reversal direction. You also can connect two restrictive switches to each receiver and use them to stop
motor rotation.
Package Include:
2 x Receiver: S1F2-DC06 / S1F2-DC09 / S1F2-DC12 / S1F2-DC24
1 x Transmitter: CV-6-2
1 x User manual
Features:
Wireless control, easy to install
Control DC motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals with
voltage DC6V / 9V / 12V / 24V.
You can rotate the motor in positive or reversal direction with the transmitter (remote control) from any place within a reliable distance; the
wireless signal can pass through walls, floors and doors.
Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
One/several transmitters can control one/several receivers simultaneously.
If you use two or more receivers in the same place, you can set them with different codes.
Transmitting Frequency: 315MHz / 433MHz
Receiver:
Model No: S1F2-DC06 / S1F2-DC09 / S1F2-DC12 / S1F2-DC24
Coding Type: Fixed code or learning code
Coding Setting: By learning
Power Supply (Operating Voltage): DC6V (S1F2-DC06), DC9V±1V (S1F2-DC09), DC12V±1V (S1F2-DC12), DC24V±1V (S1F2-DC24)
Output: DC6V (S1F2-DC06), DC9V±1V (S1F2-DC09), DC12V±1V (S1F2-DC12), DC24V±1V (S1F2-DC24)
Case Size: 74mm x 54mm x 28mm
Quiescent Current: 5mA
Rated Current: 5A
The Maximum Instantaneous Current of Starting Motor: 10A
Transmitter:
Model No.: 0021052(CV-6-2)
Channel: 6 CH
Remote Control Distance: 500m / 1500ft (theoretically)
Encode: Fixed code by Soldering
Unit size: 110mm x 50mm x 18mm
Power Supply: 1 x 23A -12V battery (Included, can be used for 12 months)
Usage:
Power supply:
Connect power supply DC6V / 9V / 12V / 24V to terminal "INPUT"; connect motor to terminal "OUTPUT". You can exchange the output wires of
motor to change the rotating direction of motor.
Setting control mode Latched: Connect Jumper S1
Function of transmitter:
Press button ▲, ▼,
on the left to control receiver 1; Press button ▲, ▼,
on the right to control receiver 2.
Press button ▲ on remote: terminal "Output" output DC power, motor rotates in positive direction.
Press button ▼ on remote: terminal "Output" output DC power, motor rotates in reversal direction.
Press button
on remote: motor stops.
Function of manual buttons in receiver:
Press button K3 in receiver: terminal "Output" output DC power, motor rotates in positive direction.
Press button K1 in receiver: terminal "Output" output DC power, motor rotates in reversal direction.
Press button K2 in receiver: motor stops.
Setting control mode Momentary: Connect Jumper S2
Function of transmitter:
Press button ▲, ▼on the left for remote control receiver 1; Press button ▲, ▼on the right for remote control receiver 2;
Press and hold button ▲ on remote: terminal "Output" output DC power, motor rotates in positive direction. Release button: motor stops.
Press and hold button ▼ on remote: terminal "Output" output DC power, motor rotates in reversal direction. Release button: motor stops.
Function of manual buttons in receiver:
Press and hold button K3 in receiver: terminal "Output" output DC power, motor rotates in positive direction. Release button: motor stops.
Press and hold button K1 in receiver: terminal "Output" output DC power, motor rotates in reversal direction. Release button: motor stops.
Restrictive function:
You can connect two restrictive switches to terminals "X1" and "X2", if the restrictive switch X1 or X2 is connected, the motor will work normally; i
f the restrictive switch X1 or X2 is disconnected, the motor will stop automatically. That means when the restrictive switch "X1" is connected, the
SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com