Astro Pneumatic ADN38 Manual - Página 3

Navegue en línea o descargue pdf Manual para Adaptador Astro Pneumatic ADN38. Astro Pneumatic ADN38 5 páginas. Xl rivet nut drill adapter kit - 3/8" capacity

Imprimir página

MODEL:

I. Product Technical Data:

Dimensions:

Weight:

Hex Shank Size:

Riveting Capability:

Rivet Nut Size

Aluminum

Nut

Steel/Copper

Material

Stainless Steel

Rivet Type:

Stroke Limit:

Working Torque:

Recommended RPM:

Requirements of Driving Tools:

Common Sizes Chart:

Rivet Nut

M10

10-24

1/4-20

5/16-18

3/18-16

ll. SAFETY GUIDE:

1. Wear adequate protective gear including ANSI

approved goggles and THICK WORK GLOVES

(RUBBER COATED)

2. Only use the nut riveting adapter with driving tool that

matches with requirements specified on Product

Technical Data.

3. Switch off the driving tool before installing or uninstalling

the nut riveting adapter.

ADN38

8.5" x 5.5" x 2.4"

2.5 lbs

6.35mm (1/4")

SAE

10-24

1/4-20

Rivet Nut

Maximum 0.7 inch

Refer to section III. Operation Guide

Low speed, driver setting (<240 RPM)

Requirements of cordless driving tool:

• Adjustable torque setting.

• Chuck capacity of 6.35 mm (1/4") shank.

• Min 12V for aluminum, or M5 and 10-24 steel rivet nuts.

• Min 14.4V for steel rivet nuts in M6, M8, 1/4" & 5/16" or stainless in M5 or 10-24.

• Min Full-size 18V+ for M10 and 3/8" rivet nuts and all other sizes in stainless steel.

WEAR GLOVES

• Clutch provides a felt and/or audible indication of reaching max setting.

Requirements of elctric or pneumatic driving tool:

• Adjustable torque setting.

• Chuck capacity of 6.35 mm (1/4") shank.

• With maximum torque > 190 in/lbs for aluminum and steel rivet nuts in smaller sizes.

• With maximum torque > 400 in/lbs for stainless steel rivet nuts.

Rivet Nut Diameter

6.9mm OD

8.9mm OD

10.9mm OD

12.9mm OD

6.9mm OD

8.9mm OD

10.9mm OD

12.9mm OD

PRODUCT TYPE:

XL RIVET NUT DRILL ADAPTER KIT

- 3/8" CAPACITY

SAE

5/16-18

3/8-16

Tool is capable but may require very high grip strength

Drill Hole Size

7mm (9/32")

9mm (3/8")

11mm (7/16")

13mm (17/32")

7mm (9/32")

9mm (3/8")

11mm (7/16")

13mm (17/36")

4. The objects to be riveted MUST BE SECURELY FIXED

BEFORE riveting in order to avoid possible injury.

Unsecured objects may rotate with the driving tool if not

secured.

5. The driving tool MUST be stopped if user releases the

adapter's body during riveting.

6. During disassembly for mandrel changing or

Maintenance, take care as there are pre-loaded springs

within the tool.

Page 2

M10

Grip Range

26 – 16ga

26 – 13ga

26 – 11ga

26 – 16ga

26 – 13ga

26 – 11ga