Astro Pneumatic Tool 78244 Manual

Navegue en línea o descargue pdf Manual para Herramientas Astro Pneumatic Tool 78244. Astro Pneumatic Tool 78244 2 páginas. 1/2" drive nano pinless universal impact sockets - metric

Imprimir página

Model:

78244

WARNING

Study, understand and follow all instructions provided

with this product. Read these instructions carefully

before installing, operating, servicing or repairing this

tool. Keep these instructions in a safe accessible place.

INTENDED USE OF THE TOOL

The 78244 Nano Pinless Universal impact Socket Set is

designed to be used with a 1/2" drive impact wrench to drive

hex fasteners. Do not use this tool outside of the designed

intent. Never modify the tool for any other purpose or use.

WARNING

Caution: To help prevent personal injury

• Use of this product can expose you to chemicals

including ethylene glycol, gasoline vapors and

engine exhaust, which are known to the State of

California to cause cancer, birth defects, or

reproductive harm. For more information, visit

www.P65Warnings.ca.gov. Always wear ANSI

approved safety equipment, safety glasses and

clothing when using this product. Study, understand,

and follow all instructions provided with this

product. Failure to read and follow all warnings and

operating instructions may result in damages and

serious injury or death.

• Always wear ANSI approved goggles when using

this product. (Users and By standers).

• Never use this tool for any application other than for

which it was designed.

• Only use accessories designed for this tool.

• Never alter or modify this tool in any way.

• Improper operation and/or maintenance of the tool,

modification of the tool, or use of the tool with

accessories not designed for it could result in

serious injury or death.

• Always select the correct accessories of the correct

size and design for the job that you are attempting to

perform.

• Always work in a clean, safe, well-lit, organized and

adequately equipped area.

• Do not begin repairs without assurance that vehicle

is in secure position, and will not move during repair.

BEFORE USE

When unpacking, check the parts diagram and part

number listing on page

included. If any parts are missing or damaged,

please call your distributor.

DO NOT DISCARD – GIVE TO USER

to make sure all parts are

Product Type:

11PC. 1/2" DRIVE NANO PINLESS

UNIVERSAL IMPACT SOCKETS - METRIC

LIFETIME WARRANTY

• Astro Pneumatic Tool Co. warrants our products to the original user

against defective material or workmanship for Lifetime Warranty

(except where noted on our price schedule) from the date of 1st use.

Astro reserves the right to determine whether the product failed

because of defective material, workmanship or other causes and to

charge back for missing parts. Astro Pneumatic Tool Co., at its

discretion, will repair products covered under this warranty free of

charge. The distributor should direct the original user to return the

product (with the exceptions listed below) with the distributor's name,

address, adequate proof of date of purchase or a copy of warranty

card, and a short note explaining the problem. Failures caused by

accident, alteration, or misuse are not covered by this warranty.

• If one part of this product fails, please do not return the entire

product. Astro will replace free of charge component parts of

this product. Items included in this category include but are not

limited to kits, hand tool kits and any other product where there

are multiple items or components that make up the unit. Please

contact the phone number below in order to obtain the replace-

ment components covered under warranty.

• Astro Pneumatic Tool Co. or its authorized service representatives

must perform all warranty repairs. Any repair to the product by

unauthorized service representatives voids this warranty. The rights

under this warranty are limited to the original user and may not be

transferred to subsequent owners.

• This warranty is in lieu of all other warranties, expressed or implied,

including warranties of merchantability and fitness for a particular

purpose. Some states do not allow the exclusion of limitations of

incidental or consequential damages so the above limitations may

not apply to you.

PLEASE DO NOT RETURN ANY PRODUCT WITHOUT CALLING

1-800-221-9705 FOR INSTRUCTIONS

PRODUCT INFORMATION

• Pinless design allows a full 360° of freedom for the

universal head to angle and rotate

• Swivel hex design transfers impact forces more

efficiently with greater durability

• Forged CRO-MO with lifetime warranty

Page 1