Coiltek CS-5100 Series Manual de instrucciones - Página 12

Navegue en línea o descargue pdf Manual de instrucciones para Accesorios Coiltek CS-5100 Series. Coiltek CS-5100 Series 17 páginas. Ultrasonic sensors

Imprimir página

1. Manual Set-Up

DIP Switch Functions

The settings of the DIP switches dictate how the control behaves. The system is capable of storing and

instantly retrieving a number of behaviors as presets. The functions of the individual switches are

labeled in the graphic below.

The first three settings, for OFFSET bias, are covered in another section. The PRESET switches allow

selection of 8 different stored control behaviors. In short, the PRESETs are simply storage for different

desired loop control behavior. PRESET storage is discussed at length in another section of this manual.

Slope Inversion

Switch 7, labeled SL/INV inverts the output slope. The default (SW7 OFF) is a 0V (4mA) signal at the

FAR position of the control range. The signal increases as the target gets closer to the sensor. This

behavior is associated with the control of machinery that feeds a process, such as a decoiler. With SW7

ON, the output is inverted such that 0V (4mA) is generated at the near point of the control range and

increases as the target draws away from the sensor. This behavior is requisite for rewinding or other

take-up equipment. The setting of the SW7 dictates how the control will react in a given PRESET when

the set-up procedure is performed.

Presets

The graphic below shows the binary address scheme for programming and retrieving programmed

presets manually. The switch setting in place at the time of set-up dictates where that particular set up is

stored. Removal of the jumper from W1, as with any of the set-up parameters, makes the preset(s)

programmed non-volatile.

If you frequently switch between several presets, you may want to consider integrating a 3CPO

accessory into your unit. This 3 position selector switch allows for immediate, remote access to

presets. Please also see the section on programming your presets with our CSWin software.