Astro Pneumatic Tool 4008 Manual de inicio rápido
Navegue en línea o descargue pdf Manual de inicio rápido para Pulverizador de pintura Astro Pneumatic Tool 4008. Astro Pneumatic Tool 4008 4 páginas.
Imprimir páginaMODEL:
WARNING
Study, understand and follow all instructions provided with this
product. Read these instructions carefully before installing,
operating, servicing or repairing this tool. Keep these instructions
in a safe accessible place.
INTENDED USE OF THE TOOL
The Astro 4008 is designed to spray enamels, lacquers, stain
and primers. Do not use this spray gun outside of the designed
intent. Never modify the spray gun for any other purpose or use.
In order to achieve the best results, surface and paint preparation
must be completed in accordance with paint manufacturer's
instructions and recommendations. Strict compliance of
applicable local and national regulations must be followed.
WARNING
• Use of this product can expose you to chemicals including
ethylene glycol, gasoline vapors and engine exhaust, which
are known to the State of California to cause cancer, birth
defects, or reproductive harm. For more information, visit
www.P65Warnings.ca.gov. Always wear ANSI approved
safety equipment, safety glasses and clothing when using
this product. Study, understand, and follow all instructions
provided with this product. Failure to read and follow all
warnings and operating instructions may result in
damages and serious injury or death.
• Always wear ANSI approved goggles when using this
product. (Users and Bystanders).
• Never use this tool for any application other than for
which it was designed.
• Only use accessories designed for this tool.
• Never alter or modify this tool in any way.
• Improper operation and/or maintenance of the tool,
modification of the tool, or use of the tool with accessories
not designed for it could result in serious injury or death.
• Always select the correct accessories of the correct size
and design for the job that you are attempting to perform.
• Always work in a clean, safe, well-lit, organized and
adequately equipped area.
• Do not begin repairs without assurance that vehicle is in
secure position, and will not move during repair.
PRODUCT INFORMATION:
• All-purpose easy-to-clean paint spray gun
• Two-piece construction with gun featuring exclusive
air valve design
• Fully adjustable wide fan pattern control
• 1 quart capacity dripless cup
SPECIFICATIONS:
Nozzle Size: 1.8mm
Operation Pressure: 50-60psi
Net Weight: 2lbs. (0.91kg)
Dimensions W x H: 6-1/2" x 12"
4008
Avg. Air Consumption: 7-12cfm
Air Inlet Thread NPT: 1/4"
Required Compressor: 3hp
Max. Pattern at 8" Distance: 11" (280mm)
PRODUCT TYPE:
SPRAY GUN WITH CUP
RED HANDLE 1.8MM NOZZLE
www.astrotools.com
1 YEAR LIMITED WARRANTY
• Astro Pneumatic Tool Co. warrants our products to the original user against defective
material or workmanship for a period of 1 year (except where noted on our price
schedule) from the date of 1st use. Astro reserves the right to determine whether the
product failed because of defective material, workmanship or other causes and to charge
back for missing parts. Astro Pneumatic Tool Co., at its discretion, will repair products
covered under this warranty free of charge. The distributor should direct the original user
to return the product (with the exceptions listed below) with the distributor's name,
address, adequate proof of date of purchase or a copy of warranty card, and a short note
explaining the problem. Failures caused by accident, alteration, or misuse are not
covered by this warranty.
• Astro Pneumatic Tool Co. or its authorized service representatives must perform all
warranty repairs. Any repair to the product by unauthorized service representatives
voids this warranty. The rights under this warranty are limited to the original user and may
not be transferred to subsequent owners.
• This warranty is in lieu of all other warranties, expressed or implied, including warranties
of merchantability and fitness for a particular purpose. Some states do not allow the
exclusion of limitations of incidental or consequential damages so the
above limitations may not apply to you.
PLEASE DO NOT RETURN ANY PRODUCT WITHOUT CALLING
1-800-221-9705 FOR INSTRUCTIONS
When unpacking, check the parts diagram and part number
listing on page 4 to make sure all parts are included. If any
parts are missing or damaged, please call your distributor.
SPRAY GUN WITH CUP
RED HANDLE 1.8MM NOZZLE
DO NOT DISCARD – GIVE TO USER
Page 1
Before Use
MADE IN CHINA