Flying Industry Development S2UB-DC06 Manual rápido - Página 3

Navegue en línea o descargue pdf Manual rápido para Mando a distancia Flying Industry Development S2UB-DC06. Flying Industry Development S2UB-DC06 4 páginas. Rf wireless remote control kit
También para Flying Industry Development S2UB-DC06: Manual rápido (4 páginas)

Imprimir página
How to pair the transmitter to the receiver:
1) Press the learning button of receiver for 1- 2 seconds; signal LED on the receiver is on. The receiver enters into status of LEARNING.
2) Press any one button on transmitter. If signal LED flashes quickly 15 times and turns off, it means learning is successful.
3) When receiver is in the status of LEARNING, press again the learning button, signal LED turns off, learning process will be discontinued.
4) The receiver can learn several remote controls with different codes.
Delete all transmitters:
We have learned remote control to the receiver. If you don't want the receiver to work with the remote control, you can delete all codes of remote
controls, which are stored in the receiver.
Operation: Press and hold the learning button of receiver until signal LED flashes slowly; release the button, LED keeps slow flash. That means all
stored codes have been deleted successfully.
SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com