DOREGRILL V. TRAD Manual de instrucciones - Página 11

Navegue en línea o descargue pdf Manual de instrucciones para Electrodomésticos de cocina DOREGRILL V. TRAD. DOREGRILL V. TRAD 14 páginas. Hot displays

Imprimir página

The working tablet:

While using the display case, lift up the shelf and lock it by pushing inwards.

Off period of use pull the tablet down.

To disassemble it, place it in vertical position and pull it up. Reverse to replace.

MAINTENANCE

ESSENTIAL CAUSES OF TEMPERED GLASS BREAKAGE

6.1

The thermal shock

There shall be no more than 80° C difference between two specific points of ice. When this

is the case, the point of rupture is reached and the ice can then explode instantly.

Ex: cleaning hot ice with a cold sponge.

6.2

Blows to the ice

When a blow is inadvertently applied to a tempered glass glazing, more precisely

to the edge or edge of it, a very small piece of glass, sometimes only the size of a

pinhead, can be detached

As a result, the molecular balance of the ice is broken. The break of ice becomes

inevitable, whether in the hour or the days that follow.

Such shocks can occur when unpacking the equipment, or when the user

accidentally bumps one of the accessories (pin, basket, sauce plate, etc.) onto the

edge of the ice by installing it.

6.3

Manipulation

Unwanted and regular movements (e.g. to take out the roasting pan on the

sidewalk every day) prematurely weaken the glazed surfaces.

IMPORTANT:

Glass, whether tempered or not, is a fragile material that should be handled with

care. Sensitive to the blows which are inflicted on it, the glass cannot in any case

break itself, without one of the aforementioned cases being at the origin.

CLEANING

We remind you that regular maintenance of your equipment is essential.

Before any cleaning and maintenance operation, let the appliance cool and disconnect

the display case beforehand, avoiding pulling on the power cable.

Do not use abrasive products for cleaning stainless steel, glazed and glazed surfaces. The use of

a sponge and soapy water is recommended. Clean electrical controls and components with a damp

cloth, and windows with a suitable product.

INSTRUCTIONS FOR USE HOT DISPLAY CASES

Revision of 2015