Canon Microfilm Scanner 500 Manual de instrucciones - Página 35

Navegue en línea o descargue pdf Manual de instrucciones para Escáner Canon Microfilm Scanner 500. Canon Microfilm Scanner 500 48 páginas.

The reset feature

The MS500 lets you store your own default settings for the film

mode. Once you have recorded the defaults, you can recall them

at any time by pressing the Reset key. To make best use of this

function, you will want to register your most frequently used val-

ues as your defaults.

To change all settings to their default values, press the Reset key.

Release the key immediately after pressing it. If you hold the key

down longer than 5 seconds, the MS500 switches into default-

entry mode.

Use the following procedure to set up your default values.

1. Hold down the Reset key on the keyboard for about 5 seconds.

The lamp next to the key begins to blink, indicating that you can

now enter the default values.

2. Press the key corresponding to the setting you want to make. For

details about the various functions and their settings, refer to ex-

planations given earlier in this manual.

You cannot select a default value for the Print setting.

In addition to selecting print-mode defaults, you can also use this

feature to record zoom settings, and to reassign the function of

certain keys on the keyboard. Procedures for both of these opera-

tions are given below.

These procedures are available only while the MS500 is set to

default-entry mode (only while the Reset lamp is blinking).

SPECIAL FEATURES