Canon EF24-70mm f/2.8L USM Instrucción - Página 5
Navegue en línea o descargue pdf Instrucción para Objetivo de la cámara Canon EF24-70mm f/2.8L USM. Canon EF24-70mm f/2.8L USM 11 páginas. Ef lens
También para Canon EF24-70mm f/2.8L USM: Manual de instrucciones (14 páginas)
Imprimir página1. Mounting and Detaching the Lens
See your camera's instructions for
instructions on mounting and detaching the
lens.
• After detaching the lens, place the lens with the
rear end up to prevent the lens surface and
electrical contacts from getting scratched.
• If the contacts get soiled, scratched, or have
fingerprints on them, corrosion or faulty
connections can result. The camera and lens
may not operate properly.
• If the contacts get soiled or have fingerprints on
them, clean them with a soft cloth.
• If you remove the lens, cover it with the dust
cap. To attach it properly, align the lens mount
K index of the dust cap as shown
index and the
in the diagram, and turn clockwise. To remove it,
reverse the order.
The lens mount has a rubber ring for enhanced
water- and dust-resistance. The rubber ring may
cause slight abrasions around the camera's lens
mount, but this will not cause any problems. If the
rubber ring becomes worn, it is replaceable by a
Canon Service Center at cost.
ENG-4