Canon RF 200-800mm F6.3-9 IS USM Manual de instrucciones - Página 14
Navegue en línea o descargue pdf Manual de instrucciones para Objetivo de la cámara Canon RF 200-800mm F6.3-9 IS USM. Canon RF 200-800mm F6.3-9 IS USM 23 páginas.
Imprimir página
7. Image Stabilizer
Image stabilizer switch
Set the image stabilizer switch to ON when you
want to use the Image Stabilizer.
This function provides image stabilization
z
appropriate for shooting conditions (such as
shooting still subjects and panning shots).
The coordinated control will work in
z
combination with cameras with in-body Image
Stabilizer.
Set the image stabilizer switch to OFF when
z
you are not going to use the Image Stabilizer.
The Image Stabilizer cannot compensate for a
z
blurred shot caused by a subject that moved.
The Image Stabilizer may not be fully effective
z
if you shoot from a violently shaking vehicle or
other transportation.
If using a camera that allows you to change
z
the shutter mode setting, [Elec. 1st-curtain] or
[Electronic] settings is recommended* to allow
the Image Stabilizer to be fully effective.
* When using an EOS R camera, select either
[Mode 1] (default factory setting) or [Mode
2] in the [Silent LV shoot.] settings, or select
[Enable] in the [Silent shutter] settings.
When using a tripod, the Image Stabilizer might
z
not be fully effective or it might be better to
set the STABILIZER switch to OFF, depending
on the type of tripod and where the tripod is
located, as well as on the camera's settings
such as shutter speed.
Even with a monopod, the Image Stabilizer will
z
be as effective as during hand-held shooting.
However, depending on the shooting conditions,
there are cases in which the Image Stabilizer
effect may be less effective.
ENG-13