COLBOR PL8-R Manual de inicio rápido

Navegue en línea o descargue pdf Manual de inicio rápido para Equipos de iluminación COLBOR PL8-R. COLBOR PL8-R 2 páginas.

Imprimir página
Pocket Fill Light
Thank you for choosing COLBOR product. Please read this manual
carefully before use and follow all instructions mentioned herein.
Caring For Your COLBOR Product
Please keep the product in a dry, clean, dust-free environment.
Keep corrosive chemicals, liquids and heat source away from the product to
prevent mechanics damage.
Use only a soft and dry cloth for cleaning the product.
Malfunction may be caused by dropping, impact of external force.
Do not attempt to disassemble the product. Doing so voids warranty.
Please have the product checked or repaired by authorized technicians if any
malfunctions happened.
Please remove the USB charging cable when the battery is fully charged.
The product might get hot during use, which is normal. Please allow certain
space for heat-sink when using it.
If you do not use the product for a long time, it might not be able to turn on
instantly due to dead battery. Please charge the product and it can resume to
work. Please charge the product every 3 months regularly.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.
Operation Instructions
7
8
2
1
6
5
① Power & Mode Switch Button
Long press for 3 seconds to turn on/off the product.
When the product is on, short press to switch among 3 light modes, CCT, HSI
and EFF mode.
② Display Screen
③ Dial
Short press down to choose the option to be adjusted.
Roll upwards to increase value, and downwards to decrease value.
④ Brightness Control
⑤ Type-C Charging Port
⑥ 1/4" Screw Hole
⑦ Cold Shoe
⑧ Phone Clamp
Interface Introduction
CCT Mode
Wireless Signal
Battery Life
Color Temperature
Brightness
Color Temperature Control (2700-9000K): Roll the Dial upwards or downwards
Brightness Control (0%~100%): Roll the Brightness Control upwards or
downwards
3
HSI Mode
4
Hue
Saturation
Brightness
In CCT mode, press the Mode Switch Button once to enter HSI mode.
1.Short press down the Dial to choose the option to be adjusted, hue or
saturation
2.Roll the Dial upwards to increase the value, and downwards to decrease the
value
3.Brightness Control (0%~100%): Roll the Brightness Control upwards or
downwards
0°
60°
120°
180°
240°
300°
360°
EFF Mode
Brightness
Frequency
Special Effect
In HSI mode, press the Mode Switch Button once to enter EFF mode. Switch
the special effect via short press the Dial in EFF mode.
Special Effect:
Fire--Fireworks--TV--Faulty Bulb--Strobe--Lightning--Pulsing--Party--
Cop Car
Brightness Control (0%~100%): Roll the Brightness Control upwards or
downwards.
Frequency Control: Roll the Dial upwards or downwards
Specifications
Color Rendering Index
Ra ＞ 95
Color Temperature Range
2700-9000K
Number of bead
105
Power
8W
Battery Capacity
3000mAh
Runtime
100% brightness for about 83 minutes
Charging Port
Type-C
Working Voltage
3.7V
Input Voltage
5V/1A