Cole & Bright 63726 Manual de inicio rápido - Página 4

Navegue en línea o descargue pdf Manual de inicio rápido para Luz exterior Cole & Bright 63726. Cole & Bright 63726 8 páginas. Solar powered + linkable persis+ security light

Imprimir página
LINKING YOUR RADAR 360˚ LIGHTS FOR THE FIRST TIME
Only TWO (2) Lights (cont)
5. On the Secondary Light move the switch on the
base to "S" position (right).
6. Press the LINK button located underneath the
switch of both units simultaneously until the lights
begin to fl ash. The lights will now start pairing mode.
Once the light on the Secondary unit stops fl ashing
and becomes a steady white light the pairing of the
2 lights has been successful. The Master unit will still
be slowly fl ashing.
7. Turn the Secondary unit to OFF position. The light
should turn off.
8. Turn the Master unit to OFF position.
The light should turn off.
Your lights are now linked. When the linking process
is completed, the Radar360˚ Linkable lights create a
chain of lights so that each light is set off by its nearest
linked light.
9. Then set Light Settings per instructions in the
following section.
IMPORTANT – IDENTIFY YOUR MASTER LIGHT SO
IT CAN BE EASILY LOCATED IN THE FUTURE.
It will be needed when adding new Radar 360˚ +
lights to the network in the future. Using a permanent
marker, circle the letter M on the sticker located
under the unit. You can also tie something bright or
easy to see to the neck between the panel & light.
10. If the link is not working as expected, simply reset
your lights to factory setting by following the
"Unlinking your Radar 360˚ + Light" Instructions
and then start again.
4
H
OFF
M
LINK
H
OFF
M
H
OFF
M
L-H
S
L-H
S
L-H
S