Canon EOS-1D Mark II Digial Manual rápido
Navegue en línea o descargue pdf Manual rápido para Software Canon EOS-1D Mark II Digial. Canon EOS-1D Mark II Digial 2 páginas. Firmware update procedures
También para Canon EOS-1D Mark II Digial: Folleto y especificaciones (20 páginas), Manual de instrucciones (28 páginas), Manual de instrucciones (41 páginas), Manual de software (2 páginas), Manual de software (2 páginas), Manual de instrucciones (19 páginas), Consejos y técnicas (35 páginas), Manual del producto (39 páginas), Manual de bolsillo (2 páginas), Manual del usuario (2 páginas), Especificaciones (2 páginas), Libro Manual (29 páginas), Manual de consulta rápida (2 páginas), Manual de actualización (8 páginas)
Imprimir página
Introduction
The EOS-1D X Mark II (G) is a digital single-lens reflex camera featuring a full-
frame CMOS sensor (approx. 35.9 mm x 23.9 mm) with approx. 20.2 effective
megapixels, Dual DIGIC 6+, normal ISO speed range of ISO 100 - ISO 51200,
viewfinder with approx. 100% field of view coverage, high-precision and high-
speed 61-point AF (up to 41 cross-type AF points), maximum continuous shooting
speed of approx. 14.0 fps during viewfinder shooting or approx. 16.0 fps during
Live View shooting, 3.2-inch (approx. 1.62 million dots) LCD monitor, Live View
shooting, 4K 59.94p/50.00p movie shooting, High Frame Rate movie shooting
(Full HD at 119.9p/100.0p), Dual-Pixel CMOS AF, and GPS function.
Item Check List
Before starting, check that all the following items are included with your camera. If
anything is missing, contact your dealer.
Camera
(with body cap and battery
compartment cap)
Wide Strap
* Attach the Eyecup Eg to the viewfinder eyepiece.
* Be careful not to lose any of the above items.
ENGLISH
Instruction manuals (PDF files) and software can
Instruction Manuals
be downloaded from the Canon website.
Quick Guide
www.canon.com/icpd
Instruction manual (PDF files) download site: www.canon.com/icpd
o
Camera Instruction Manual, Wired LAN Instruction Manual, and Software
•
Instruction Manuals
CEL-SW6DA210
© CANON INC. 2016
PRINTED IN THE EU
Quick Start Guide
1
6
Insert the battery.
To charge the battery, see page
o
42 of the Instruction Manual.
2
7
Insert the card.
The left slot is for CF cards, and
o
the right slot is for CFast cards.
* Shooting is possible as long as there is a CF card or CFast
8
card in the camera.
3
Attach the lens.
o
Align the red mount index on
the lens with the red mount
index on the camera.
9
4
Set the lens's focus mode
switch to <f>.
5
Set the power switch to
Number of Possible Shots
<1>.
Temperature
Possible shots
Safety Precautions
The following precautions are provided to prevent harm or injury to yourself and
others. Make sure to thoroughly understand and follow these precautions before using
the product.
If you experience any malfunctions, problems, or damage to the product,
contact the nearest Canon Service Center or the dealer from whom you
purchased the product.
Follow the warnings below. Otherwise, death or
Warnings:
serious injuries may result.
●
To prevent fire, excessive heat, chemical leakage, explosions, and electrical
shock, follow the safeguards below:
• Do not use any batteries, power sources, or accessories not specified in the
Instruction Manual. Do not use any home-made or modified batteries, or the
product if it is damaged.
• Do not short-circuit, disassemble, or modify the battery. Do not apply heat
or solder to the battery. Do not expose the battery to fire or water. Do not
subject the battery to strong physical shock.
• Do not insert the battery's plus and minus ends incorrectly.
• Do not recharge the battery in temperatures outside the allowable charging
(working) temperature range. Also, do not exceed the recharge time indicated in
the Instruction Manual.
• Do not insert any foreign metallic objects into the electrical contacts of the
camera, accessories, connecting cables, etc.
●
When disposing of a battery, insulate the electrical contacts with tape. Contact
with other metallic objects or batteries may cause a fire or an explosion.
Eyecup Eg
Battery Pack
Battery Charger
●
If excessive heat, smoke, or fumes are emitted when recharging the battery,
LP-E19
LC-E19
immediately unplug the battery charger from the power outlet to stop
(with protective cover)
recharging. Otherwise, it may cause a fire, heat damage, or electrical shock.
(with protective cover)
●
If the battery leaks, changes color, deforms, or emits smoke or fumes, remove
it immediately. Be careful not to get burned in the process. It may cause a fire,
electrical shock or burns if you keep using it.
●
Prevent any battery leakage from contacting your eyes, skin, and clothing. It
can cause blindness or skin problems. If the battery leakage comes in contact
with your eyes, skin, or clothing, flush the affected area with lots of clean water
without rubbing it. See a physician immediately.
●
Do not leave any cords near a heat source. It can deform the cord or melt the
Interface Cable
Cable protector
insulation and cause a fire or electrical shock.
IFC-150U II
●
Do not hold the camera in the same position for long periods of time. Even if the
camera does not feel too hot, prolonged contact with the same body part may
cause skin redness or blistering due to low-temperature contact burns. Using a
tripod is recommended for people with circulation problems or very sensitive skin,
or when using the camera in very hot places.
●
Do not fire the flash at anyone driving a car or other vehicle. It may cause an
accident.
●
When the camera or accessories are not in use, make sure to remove the
battery and disconnect the power plug from the equipment before storing. This
is to prevent electrical shock, excessive heat, fire, and corrosion.
Set the shooting mode to <d>.
Image Playback
Press the <W> button.
o
Look at the top LCD panel and
o
Index
turn the <6> or <5> dial to
6
select <d>.
Focus on the subject.
o
Look through the viewfinder and aim
the viewfinder center over the subject.
Press the shutter button halfway, and
o
the camera will focus on the subject.
0
B
Take the picture.
Shooting
o
Press the shutter button
information
completely to take the picture.
x
Playback
Review the picture.
L
o
The image just captured will be
Erase
displayed for approx. 2 sec. on
the LCD monitor.
o
To display the image again,
press the <x> button.
Room Temperature
Low Temperatures
(23°C / 73°F)
(0°C / 32°F)
Approx. 1210 shots
Approx. 1020 shots
●
Do not use the equipment where there is flammable gas. This is to prevent an
explosion or a fire.
●
If you drop the equipment and the casing breaks open to expose the internal
parts, do not touch the exposed internal parts. There is a possibility of an
electrical shock.
●
Do not disassemble or modify the equipment. High-voltage internal parts can
cause electrical shock.
●
Do not look at the sun or an extremely bright light source through the camera or
lens. Doing so may damage your vision.
●
Keep equipment out of the reach of children and infants, including when in use.
Straps or cords may accidentally cause choking, electrical shock, or injury.
Choking or injury may also occur if a child or infant accidentally swallows a
camera part or accessory. If a child or infant swallows a part or accessory,
consult a physician immediately.
●
Do not use or store the equipment in dusty or humid places. Likewise, keep the
battery away from metallic items and store it with its protective cover attached to
prevent short-circuit. This is to prevent fire, excessive heat, electrical shock, and
burns.
●
Before using the camera inside an airplane or hospital, check if it is allowed.
Electromagnetic waves emitted by the camera may interfere with the plane's
instruments or the hospital's medical equipment.
●
To prevent a fire and electrical shock, follow the safeguards below:
• Always insert the power plug all the way in.
• Do not handle a power plug with wet hands.
• When unplugging a power plug, grasp and pull the plug instead of the cord.
• Do not scratch, cut, or excessively bend the cord or put a heavy object on
the cord. Also do not twist or tie the cords.
• Do not connect too many power plugs to the same power outlet.
• Do not use a cord whose wire is broken or insulation is damaged.
●
Unplug the power plug periodically and clean off the dust around the power outlet with
a dry cloth. If the surrounding is dusty, humid, or oily, the dust on the power outlet may
become moist and short-circuit the outlet, causing a fire.
●
Do not connect the battery directly to an electrical outlet or a car's cigarette lighter
outlet. The battery may leak, generate excessive heat or explode, causing fire,
burns, or injuries.
●
A thorough explanation of how to use the product by an adult is required when the
product is used by children. Supervise children while they are using the product.
Incorrect usage may result in electrical shock or injury.
●
Do not leave a lens or lens-attached camera in the sun without the lens cap
attached. Otherwise, the lens may concentrate the sun's rays and cause a fire.
●
Do not cover or wrap the product with a cloth. Doing so may trap heat within and
cause the casing to deform or catch fire.
●
Be careful not to get the camera wet. If you drop the product in the water or if
water or metal get inside the product, promptly remove the battery. This is to
prevent fire, electrical shock, and burns.
●
Do not use paint thinner, benzene, or other organic solvents to clean the product.
Doing so may cause fire or a health hazard.
Preparation
Menu Operations
Magnify
<M>
6
button
LCD
<6> Main Dial
monitor
<5> Quick
Control Dial
u
<Q> button
<0> button
9
1. Press the <M> button to display the menu.
2. Each time you press the <Q> button, the main tab will switch.
5 6
3. Turn the <6> dial to select a secondary tab, then turn the <5> dial to
Select image
select the desired item.
4. Press <0> to display the setting.
5. Turn the <5> dial to set the item, then press <0>.
Main tabs
Secondary tabs
Menu items
Menu
settings
●
Use only a commercially-available blower to blow away dust when it adheres to
Follow the cautions below. Otherwise, physical
the lens, viewfinder, reflex mirror, focusing screen, etc. Do not use cleaners that
Cautions:
injury or property damage may result.
contain organic solvents to clean the camera body or lens. For stubborn dirt, take
the camera to the nearest Canon Service Center.
●
Do not use or store the product in a high-temperature location such as inside
●
Do not touch the camera's electrical contacts with your fingers. This is to prevent
a car under the hot sun. The product may become hot and cause burns.
the contacts from corroding. Corroded contacts can cause camera malfunction.
Doing so may also cause battery leakage or explosion, which will degrade the
●
If the camera is suddenly brought in from the cold into a warm room, condensation
performance or shorten the life of the product.
may form on the camera and internal parts. To prevent condensation, first put the
●
Do not carry the camera around when it is attached to a tripod. Doing so may
camera in a sealed plastic bag and let it adjust to the warmer temperature before
cause an injury or an accident. Also make sure the tripod is sturdy enough to
taking it out of the bag.
support the camera and lens.
●
If condensation forms on the camera, do not use the camera. This is to avoid damag-
●
Do not leave the product in a low-temperature environment for an extended
ing the camera. If there is condensation, remove the lens, card and battery from the
period of time. The product will become cold and may cause injury when
camera, and wait until condensation has evaporated before using the camera.
touched.
●
If the camera will not be used for an extended period, remove the battery and store the
camera in a cool, dry, well-ventilated location. Even while the camera is in storage, press
●
Do not fire the flash near the eyes. It may hurt the eyes.
the shutter button a few times once in a while to check that the camera is still working.
●
Never play the provided CD-ROM in a drive that is not compatible with the
●
Avoid storing the camera where there are chemicals that result in rust and corrosion
CD-ROM. If you use it in a music CD player, you may damage the speakers and
such as in a chemical lab.
other components. When using headphones, there is also a risk of injury to your
●
If the camera has not been used for an extended period, test all its functions before
ears from excessively loud volume.
using it. If you have not used the camera for some time or if there is an important shoot
●
While listening with headphones, do not change the sound-recording settings.
such as a foreign trip coming up, have the camera checked by your nearest Canon
Doing so may cause a blast of loud sound that will hurt your ears.
Service Center or check the camera yourself and make sure it is working properly.
●
If you use continuous shooting, Live View shooting, or movie shooting for a prolonged
Handling Precautions
period, the camera may become hot. This is not a malfunction.
●
If there is a bright light source inside or outside the image area, ghosting may occur.
Camera Care
LCD Panel and LCD Monitor
●
This camera is a precision instrument. Do not drop it or subject it to physical shock.
●
Although the LCD monitor is manufactured with very high precision technology with
over 99.99% effective pixels, there may be a few dead pixels displaying only black
●
The camera is not waterproof and cannot be used underwater. If you accidentally
or red, etc. among the remaining 0.01% or less pixels. Dead pixels are not a malfunc-
drop the camera into water, promptly consult the nearest Canon Service Center.
tion. They do not affect the images recorded.
Wipe off any water droplets with a dry and clean cloth. If the camera has been
●
If the LCD monitor is left on for a prolonged period, screen burn-in may occur where
exposed to salty air, wipe it with a clean, well-wrung wet cloth.
you see remnants of what was displayed. However, this is only temporary and will
●
Never leave the camera near anything having a strong magnetic field such as a
disappear when the camera is left unused for a few days.
magnet or electric motor. Also, avoid using or leaving the camera near anything
●
The LCD monitor display may seem slightly slow in low temperatures, or look black
emitting strong radio waves, such as a large antenna. Strong magnetic fields can
in high temperatures. It will return to normal at room temperature.
cause camera misoperation or destroy image data.
Lens
●
Do not leave the camera in excessive heat, such as in a car in direct sunlight. High
temperatures can cause the camera to malfunction.
After detaching the lens from the camera, put down the lens
●
The camera contains precision electronic circuitry. Never attempt to disassemble
with the rear end up and attach the rear lens cap to avoid
the camera yourself.
scratching the lens surface and electrical contacts.
●
Do not block the mirror operation with your finger, etc. Doing so may cause a
malfunction.
Q Quick Control
Image Quality Settings
Image size
Press the <Q> button.
o
The Quick Control screen will appear.
X
X
o
Select [z2: Img type/size], then press <0>.
o
Turn the <6> or the <5> dial to select the image size, then
press <0>.
Image size
ISO speed
Exposure
compensation
Aperture
/AEB setting
Shutter speed
Flash
exposure
Picture Style
compensation
A Picture Style
AF Operation
Custom
Controls
White Balance
White Balance Correction
Drive Mode
Metering Mode
Auto Lighting Optimizer
Use the <9> to select a function and press
<0>.
o
Style
Turn the
<5> o
r <6> dial to change some of the settings.
o
Auto
D
P
Standard
Electronic Level
Portrait
Q
R
Landscape
o
Each time you press the <B>
Fine Detail
button, the screen display will
u
change.
Monochrome
V
Display the electronic level.
o
o
For <S> (Neutral) and <U> (Faithful), refer to the camera's
instruction manual.
Contacts
Pixels
Possible shots
RAW: Turn the <6> dial to select
the quality.
JPEG: turn the <5> dial to select
the quality.
o
Select [z1]: [Picture Style], then
press <0>.
Select a Picture Style, then press
o
<0>.
Description
Color tones optimized for the particular scene.
.
Vivid colors and sharp images
Nice skin tones and slightly sharp images.
Vivid blue skies and greenery and very sharp images.
Detailed outline and fine texture.
Black-and-white images.