Doremi Labs HDVI-20d Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Media Converter Doremi Labs HDVI-20d. Doremi Labs HDVI-20d 16 páginas.

Down

Left

Right

Exit

Select

6.1 Restore I/O settings

This mode is very important should you lose track of the I/O settings of the HDVI-20d. When the I/O settings

are restored, the HDVI-20 output will be set to 1280x720-59.94. The input will be set to Pattern and the unit

will output color bars.

To Restore I/O settings, turn the unit OFF, Hold the POWER button down and turn the unit back ON while

keeping the POWER button down for at least 20 seconds then release the POWER button and recycle

power to the unit.

When OSD is on, select IN and use the 2,4,6,8 keys to select the desired input, then hit 5 or ENTER.

When OSD is off, you can use the CH + key to change the input source.

DISPLAY

Access to: Brightness, Contrast, Hue, Saturation and Flesh Tone settings

IMAGE

Access to Scaling, Adaptive De-interlacing, Noise Reduction, Auto-Filtering, Film

Mode Detect and Sharpness settings

POSITION

Access Input Horizontal and Vertical Frame Offset and Horizontal and Vertical Flip

Control

COLOR

Access to sRGB, Gamma Correction, Color Temperature, Red, Green and Blue

settings

Sets the on-screen display's Horizontal and Vertical positions, Blend, Timeout and Zoom.

SDI Input Settings: Selects RGB, XYZ' or YPbPr (default) for single link and dual link formats. If

the input format detected is single link, the single link settings will be used. When a signal is

detected on Link-B, the dual link settings will be used. Defaults are YPbPr for Single Link formats

and RGB for Dual Link formats.

ENTER or 5

Navigate up

Navigate down

Navigate left

Navigate Right

Exit submenu and menu

Activate the selection