Asus A7V8X-LA Kamet 2 Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Placa base Asus A7V8X-LA Kamet 2. Asus A7V8X-LA Kamet 2 18 páginas. Kamet 2

3. System memory

The motherboard comes with two Double Data Rate (DDR) Dual Inline Memory

Module (DIMM) sockets. These sockets support up to 2GB system memory using

184-pin unbuffered non-ECC PC2700/PC2100/PC1600 double-sided DDR DIMMs.

The following figure illustrates the location of the DDR DIMM sockets.

A7V8X-LA (KAMET2)

A7V8X-LA (KAMET2) 184-Pin DDR DIMM Sockets

CAUTION: DIMMs are keyed to fit with only one direction. DO NOT force a

DIMM into a socket to avoid damaging the DIMM.

You may install 64MB, 128MB, 256MB, 512MB, and 1GB DDR DIMMs into the

DIMM sockets using the memory configurations in this section.

Make sure to unplug the power supply before adding or removing DIMMs or

other system components. Failure to do so may cause severe damage to both

the motherboard and the components.

Follow these steps to install a DIMM.

1. Unlock a DIMM socket by pressing

the retaining clips outward.

2. Align a DIMM on the socket such

that the notch on the DIMM

matches the break on the socket.

3. Firmly insert the DIMM into the

socket until the retaining clips

snap back in place and the DIMM

is properly seated.

Unlocked Retaining Clip

ASUS A7V8X-LA Motherboard

DDR DIMM notch