Daemyung WEBGATE TDM08-SDI-TX Manual - Página 7

Navegue en línea o descargue pdf Manual para Multiplexor Daemyung WEBGATE TDM08-SDI-TX. Daemyung WEBGATE TDM08-SDI-TX 8 páginas. Hs video multiplexer

CAMERA CONFIG Mode Operation

1. Connect camera to TDM08-TX's CH1 (VIDEO IN) using COAX cable.

- Only ch 1 can be used as CAMERA CONFIG mode.

- If non PoC Camera: Supply the individual power to camera. To control the camera's PTZ

and/or OSD, connect the RS485 line between camera and TDM08-TX.

- If PoC Camera: Don't require any other cables except COAX cable.

2. Connect monitor to TDM08-SDI-TX's MUXOUT(COAX).

3. Set the CONFIG SW ON.

4. TDM08-SDI-TX's CAM ID and BAUD MUST be set the same as the camera's RS485 ID and

BAUD.

5. OSD control can be performed using UP, DOWN, LEFT, RIGHT, ENTER key in the front. These

keys are used only when the mode is CAMERA CONFIG mode.