bolid S2000-IP-03 Manual del usuario - Página 15

Navegue en línea o descargue pdf Manual del usuario para Sensores de seguridad bolid S2000-IP-03. bolid S2000-IP-03 16 páginas. Analog addressable rate-of-rise and fixed temperature detector
También para bolid S2000-IP-03: Manual de instrucciones (2 páginas)

3.4.6 If the network controller has registered no messages said above from the address of the S2000-IP-
03 or the detector LED operation does not match to that described above, the detector appears to be
inoperable and must be replaced.
3.4.7 When testing is finished make sure the detector is ready for normal operation. Restore all links
between outputs of control devices and actuators with automated fire-fighting equipment and notify the
proper authorities that the system is back in operation.
Conduct all tests with equipment known to be in good conditions!
3.5

Technical Examination

Technical examination is not applicable for this equipment.
3.6

Preservation (Depreservation, Represervation)

Preservation is not applicable for this equipment.
4.1
Repair of faulty equipment is to be performed by the manufacturer or in authorized repair
centers. The equipment shall be sent for repair in compliance with Company Standard QMS 8.5.3-
2015, which can be found online at our website https://bolid.ru/support/remont/.
Attention!
The equipment shall be submitted for repair being assembled and clean and along
with all the parts listed in the documentation.
Claims are accepted only if a reclamation report describing the problem is applied to
the submitted equipment.
4.2
A detector's failure resulted from consumer's not observing rules of mounting and operation is
not a reason for claims and warranty repair.
4.3
Claims should be submitted to the following address:
NVP BOLID, #4 Pionerskaya Str., Korolyov, Moscow Region, 141070, Russia
Phone/fax: +7 (495) 775-71-55 (PBX). E-mail: [email protected].
4.4
In case of any issue related to use of the product, please contact the technical support: +7 (495)
775-71-55 or e-mail: [email protected].
5.1
Storage in a transport container is permitted at ambient temperatures -50°С through +50°С and
relative humidity up to 95% at +35°С.
5.2
Storage in the consumer package is permitted only in heated premises at temperatures +5
through +40°С and relative humidity up to 80% at +20°С.
6.1
The detector can be transported in a transport container at ambient temperatures minus 50
through +50°С and relative humidity up to 95 % at +35°С.
16

4 Repair

5 Storage

6 Transporting