bolid DIP-34A-03 Manual de instrucciones

Navegue en línea o descargue pdf Manual de instrucciones para Alarma de humo bolid DIP-34A-03. bolid DIP-34A-03 4 páginas. Analog addressable photoelectric smoke detector

Imprimir página

GENERAL

DIP-34A-03 Analog Addressable Photoelectric Smoke Detector (hereinafter referred to as the DIP-34A-03 or the detector)

is to be used in a fire alarm system. It is designed to detect fires which come with appearing of smoke within closed

spaces.

The DIP-34A-03 operates under control of the S2000-KDL or S2000-KDL-2I controller which the detector is connected to

and which supplies power and communicates data with the DIP-34A-03 via the two-wire multiplex addressable polling

loop being a part of an Orion integrated security system. Up to 127 DIP-34A-03 detectors can operate under a single

S2000-KDL or S2000-KDL-2I.

The DIP-34A-03 detects smoke inside its sensing chamber by sensing light reflected by smoke particles and responds

with its state to the S2000M panel or Orion Pro software via the S2000-KDL or S2000-KDL-2I controller. Depending on

detected smoke amount these states can be Norm, Fire Prealarm or Fire Alarm.

The detector meets the requirements of Appendix "P" of Russian Regulations СП5.13130.2009. In addition, the detector

can respond to the console's request with a current condition of its sensing chamber which corresponds to its smoke or

dust level. Based on this answer, an operator of the control panel can make a decision about maintenance works or

waiting for a Fire Pre-alarm message in case of appearance of smoke at the beginning of a fire.

Electromagnetic compatibility of the detector meets the requirements of the third immunity level accordingly to Russian

standards.

The DIP-34A-03 supports DPLS_v2.xx Multiplex Addressable Polling Loop Protocol enabling monitoring addressable loop

voltage at the detector's location. The version of DIP-34A-03 firmware is 1.01.

Operability of the detector can be periodically tested by means of a laser test tool (such as the test tool produced by the

System Sensor Company).

SPECIFICATIONS

Sensitivity

Response Time

Ingress Protection Rating

Input Voltage (from an S2000-KDL(-2I))

Current Consumption (via the loop of the S2000-KDL(-2I))

Pre-operation Time

Operating Temperatures

Storage Temperatures

Humidity

Overall Dimensions (diameter x height)

Weight

Average Lifetime

The content of precious materials

STANDARD DELIVERY

For single-piece delivery:

DIP-34A-03 Detector

Instruction Manual

Address Sticker

Protective Cover

Unit Package

WIRING

Figure 1 shows the connection diagram for connecting a DIP-34A-03 detector to the addressable polling loop of an

S2000-KDL or S2000-KDL-2I controller. The first terminal of the mounting base can be used to connect a cable screen.

DIP-34A-03

Analog Addressable Photoelectric

Smoke Detector

INSTRUCTION MANUAL

- 1 pc.

0.05 - 0.2 dB/m (1.2 %/m to 4.7 %/m)

10 s max

IP 41

8 ÷ 11 V dc

0.5 mA max

60 s max

−30 to +55° C

−50 to +50° C

Up to 93% at +40° C, non-condensing

100×47 mm max

0.2 kg max

At least 10 years

No need to account for storage, disposal and recycling

(Clause 1.2 of Russian Standard ГОСТ 2.608-78)

For group delivery:

DIP-34A-03 Detector

Instruction Manual

Address Sticker

Protective Cover

Group Package

- 10 pcs.

- 1 pc.

- 10 pcs.

- 1 pc.