bolid USB-RS232 Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Media Converter bolid USB-RS232. bolid USB-RS232 9 páginas. Interface converter

Imprimir página

2.2.6 Extreme Situation Actions

Warning!

If sparks, fire, smoke, and / or smell of burning are found at the installation site of the

device, the device must be de-energized and sent for repair

3.1

General

The product is to be maintained according to a planned preventive strategy which provides

annual scheduled maintenance.

3.2

Safety Precautions

The detector should be maintained by personnel qualified for the Accident Prevention Level of

II or higher.

3.3

Maintenance Procedures

Scheduled maintenance works include:

– Visual checking of the interface converter conditions;

– Checking conditions of external installation wires and contact joints;

– Checking operability as per Clause 3.4 of this manual.

WARNING!

Removing the device's PC board from its housing automatically voids the

manufacturer's warranty

3.4

Performance Testing

3.4.1 Testing operation capability of the interface converter as part of an S2000M panel is testing the

panel for stable communications with a personal computer using PProg utility. Put the panel to the

programming mode, and then conduct reading / writing the S2000M configuration.

3.4.2 Indicator's illuminating means receiving / transmitting signals over the RS-232 interface line.

3.5

Technical Examination

Technical examination is not applicable for this equipment.

3.6

Preservation (Depreservation, Represervation)

Preservation is not applicable for this equipment.

4.1 Repair of faulty equipment is to be conducted by the manufacturer or in authorized repair centers.

The equipment shall be sent for repair in line with established procedures.

Attention!

The equipment shall be submitted for repair being assembled and clean and along

with all the parts listed in the documentation.

Claims are accepted only if a reclamation report describing the failure is applied to

the submitted equipment.

4.2 An equipment fault resulted from consumer's not observing rules of mounting and operation is not

a reason for claims and warranty repair.

4.3 Claims shall be submitted to the following address:

NVP BOLID, #4 Pionerskaya Str., Korolyov, Moscow Region, 141070, Russia

Tel./fax: +7 (495) 775-71-55 (PBX), Email: [email protected].

4.4 In case of any issue related to use of the product, please contact the technical support: +7 (495)

775-71-55 or e-mail: [email protected].