Canon WebView Livescope MV Ver. 2.1 LE Manual del usuario - Página 20

Navegue en línea o descargue pdf Manual del usuario para Software Canon WebView Livescope MV Ver. 2.1 LE. Canon WebView Livescope MV Ver. 2.1 LE 24 páginas. Versatile monitoring software

Imprimir página
10

Error Messages

(1) Network connection errors (DNS errors):
Message
Cause
Action to
be taken
(2) Network connection error (time out):
Message
Cause
Action to
be taken
(3) Failed to retrieve camera server description:
Message
Cause
Action to
be taken
(4) Connected to a camera server with old version of firmware:
Camera server registration error [04]
Message
Cause
Action to
be taken
20
The camera server could not be found. Make sure:
• The network address is correct.
• DNS setting is correct.
The specified network address could not be found.
• Enter the network address correctly.
• Set the DNS correctly.
Could not find the camera server. Make sure:
• The network address is correct.
• The camera server is turned on.
• The camera server is connected properly to your network.
The connection to the specified network address timed out.
• Enter the network address correctly.
• Turn on power to the camera server.
• Connect the camera server to the network correctly.
Could not find the camera server. Make sure:
• The camera server is compatible with WebView Livescope MV Ver. 2.1.
• The network address is correct.
• The camera server is connected properly to your network.
Camera server description could not be retrieved because the connection target was
not a camera server.
• Connect to a camera server that is compatible with WebView Livescope MV Ver. 2.1 LE.
• Enter the network address correctly.
• Connect the camera server to the network correctly.
Could not retrieve a description from the camera server. Make sure:
• The camera server is compatible with WebView Livescope MV Ver. 2.1.
• Firmware of VB101 is version 3.0 or later.
The version of the firmware in the camera server is old.
• Connect to the camera server that is compatible with WebView Livescope MV Ver. 2.1 LE.
• Upgrade the VB101 firmware to 3.0 or later.
Camera server registration error [01]
Camera server registration error [02]
Camera server registration error [03]