Canon WebView Livescope MV Ver. 2.1 LE Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Software Canon WebView Livescope MV Ver. 2.1 LE. Canon WebView Livescope MV Ver. 2.1 LE 24 páginas. Versatile monitoring software

Imprimir página

Registering Cameras Using "Search Camera"

If you do not know the IP address of the camera server, you can search camera servers connected to

the network and register a camera from among the camera servers that are detected. Since it is

possible to detect only camera servers on the same LAN, for other camera servers, please use the

Make sure that the camera you just registered appears in the

Registered cameras list.

To register more than one camera from a different camera server,

repeat the procedure from step 1 .

When you click OK, images from the registered camera can be

viewed.

Click the Search Camera button.

Click Next. The camera servers connected to the network are

automatically detected.

*If HTTP port other than 80 is used, the Search Camera feature

will only be available with the VB150. For other camera servers,

please use the Register Camera registration procedure

described on page 8.

The detected camera servers and the cameras that can be

registered are displayed. Select the camera to be registered. If

you select a camera server, all cameras connected to that server

are selected. When a selection is made, the Administration

Account dialog box appears where you must enter the

Administrator ID and Password that are set in the camera server.

Then click Finish.

Make sure that the camera you just registered appears in the

Registered cameras list.

When you click OK, images from the registered camera can be

viewed.