Canon LV 5210 - SVGA LCD Projector Especificación - Página 20
Navegue en línea o descargue pdf Especificación para Proyector Canon LV 5210 - SVGA LCD Projector. Canon LV 5210 - SVGA LCD Projector 47 páginas. Expand serial command functional specification
También para Canon LV 5210 - SVGA LCD Projector: Especificación (22 páginas)
Imprimir página
EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
8.5.5
CF_V-POS COMMAND
COMMAND
"CF_V-POS_%1" [CR]
"0000-nnnn"-- Directly set Vertical Position
%1
"UP"---------------- Vertical Position setting value +1.
"DN"---------------- Vertical Position setting value-1
Set vertical position of PC signal. Only valid when it is in the usual Power
ON status.)
Details
projector. Therefore, when ALL OFF the projector, the value will return to
the original setting. (stays in STANDBYMODE)
Acceptable
Response
Unacceptable
8.5.6
CF_DDOTS COMMAND
COMMAND
"CF_DDOTS_%1" [CR]
"0100-nnnn"-- Directly set Display Dots value.
%1
"UP"---------------- Display Dots ＋1
"DN"---------------- Display Dots -1
et Display Dots of PC signal
The value set by this Command will not be saved to the projector.
Therefore, when ALL OFF the projector, the value will return to the original
Details
setting. (stay in STANDBYMODE.)
(stays in STANDBYMODE.)
（Only valid when it is in the usual Power ON status.)
Acceptable
Response
Unacceptable
8.5.7
CF_DLINECOMMAND
COMMAND
"CF_DLINE_%1" [CR]
"0100-nnnn"-- directly specify display Line value. "nnnn" means maximum.
%1
"UP"---------------- Display Line ＋1
"DN"---------------- Display Line -1
Set Display Line of PC signal（Only valid when it is in the usual Power ON
status.)
The value set by this Command will not be saved to the projector.
Details
Therefore, when ALL OFF the projector, the value will return to the original
setting. (stays in STANDBYMODE.)
(stays in STANDBYMODE.)
Acceptable
Response
Unacceptable
"nnnn" means maximum value.
This value is from current Total Line value – display
Line value.
The value set by this Command will not be saved to the
"000" [CR]
"101" [CR] ----Input-VIDEO
"nnnn" means maximum value.
This value is from current Total Dots value-Horizontal
position value
"000" [CR]
"101" [CR] ----Input-VIDEO
This value is from current Total Line value – Vertical
Position value.
"000" [CR]
"101" [CR] ----Input-VIDEO
Page
20