Canon LV-7220 Especificación funcional - Página 12
Navegue en línea o descargue pdf Especificación funcional para Proyector Canon LV-7220. Canon LV-7220 20 páginas. Expand serial functional specification
También para Canon LV-7220: Especificación funcional (42 páginas)
Imprimir página
Basic Serial Command Functional Specification
6.31. Computer 2 SCART Command
Command
"C26" [CR]
Select SCART RGB input for Computer 2.
Detail
However, when Computer 2 terminal is set to Monitor Out, acceptable command is
returned, but does not execute command.
Acceptable
Response
Unacceptable
6.32. Image (Toggle) Command
Command
"C27" [CR]
Switch Image setting status.
Detail
This command works the same as the Remote control's "IMAGE" button.
Acceptable
Response
Unacceptable
6.33. On Start Setting Command
Command
"C28" [CR]
Set Power On Start status
Detail
This setting status is stored in EEPROM, hold even if turning Off and On.
Acceptable
Response
Unacceptable
6.34. On Start Cancellation Command
Command
"C29" [CR]
Cancel Power On Start status.
Detail
This setting status is stored in EEPROM, hold even if turning Off and On.
Acceptable
Response
Unacceptable
6.35. Power Management Ready Command
Command
"C2A" [CR]
Set Power Management to Ready mode.
Detail
This setting status is stored in EEPROM, hold even if turning Off and On.
Acceptable
Response
Unacceptable
6.36. Power Management Off Command
Command
"C2B" [CR]
Set Power Management to Off mode.
Detail
This setting status is stored in EEPROM, hold even if turning Off and On.
Acceptable
Response
Unacceptable
6.37. Power Management Shut Down Command
Command
"C2E" [CR]
Set Power Management to Shut Down mode.
Detail
This setting status is stored in EEPROM, hold even if turning Off and On.
Acceptable
Response
Unacceptable
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
Page 11 of 19