Canon LV-7320U Manual del usuario - Página 19

Navegue en línea o descargue pdf Manual del usuario para Proyector Canon LV-7320U. Canon LV-7320U 40 páginas. Canon projector user manual

BASIC OPERATIONS

TURNING ON THE PROJECTOR

Complete the peripheral connections (with Computer, VCR,

etc.) before turning on the projector. (Refer to "CONNECTING

TO THE PROJECTOR" on pages 10~13 for connecting that

equipment.

Connect the projector's AC power cord into a wall outlet. The

LAMP indicator lights RED, and the READY indicator lights

GREEN.

Press the power ON-OFF button on the Remote Control Unit or

on the Top Control to ON. The LAMP POWER indicator dims,

and the Cooling Fans start to operate. The Preparation Display

appears on the screen and the count-down starts. The signal

from the source appears after 30 seconds.

TURNING OFF THE PROJECTOR

Press the power ON-OFF button on the Remote Control Unit or

on the Top Control, and the message "Power off?" appears on

the screen.

Press the power ON-OFF button again to turn off the projector.

The LAMP indicator lights bright and the READY indicator turns

off. The Cooling Fans operate for 90 seconds after the

projector is turned off. (During this "Cooling Down" period, this

appliance cannot be turned on.)

When cooling the projector has finished, the READY indicator

turns to green again and you can turn the projector on. After

cooling down completely, disconnect the AC power cord.

TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU TURN IT ON, WAIT AT LEAST 5

MINUTES BEFORE TURNING IT OFF.

When the TEMPERATURE WARNING indicator flashes red, the projector is automatically turned off. Wait

at least 5 minutes before turning the projector on again.

If the TEMPERATURE WARNING indicator continues to flash, follow procedures below:

1. Disconnect the AC power cord from the AC outlet.

2. Check the air filters for dust accumulation.

3. Clean the Air Filter. (See "AIR FILTER CARE AND CLEANING" section on page 33.)

4. Press the power ON-OFF button to ON.

If the TEMPERATURE WARNING indicator still continues to flash, call your authorized dealer or service

station.

NOTE: The Cooling Fan may work for cooling while the projector is turned off. When the Cooling

Fan is working, TEMPERATURE WARNING INDICATOR flashes red.

The Preparation Display disappears after 30 seconds.

Power off?

The message disappears after 4 seconds.