Canon LV-8235 UST Manual de montaje e instalación - Página 21
Navegue en línea o descargue pdf Manual de montaje e instalación para Proyector Canon LV-8235 UST. Canon LV-8235 UST 36 páginas. Ultra-short throw wxga networkable projector, with built-in speaker and 3d ready
También para Canon LV-8235 UST: Especificaciones (26 páginas), Especificaciones (3 páginas)
Imprimir página
r
Adjust the vertical tilt (Adjustable range: +5° - –5°)
¡ Loosen the bolt A located on the left of the adjustment unit using a hexagon wrench (3 mm) so that adjustment
can be carried out.
¡ Turn the adjustment knob B located on the top-left side of the adjustment unit to adjust the vertical tilt.
¡ Tighten the bolt A which was loosened using the hexagon wrench (3 mm).
* "B" marks appear on the setting plate to indicate the locations of the bolt and adjustment knob.
t
Adjust the horizontal roll (Adjustable range: +5° - –5°)
¡ Loosen the bolt A located on the front right side of the adjustment unit using a hexagon wrench (3 mm) so that
adjustment can be carried out.
¡ Turn the adjustment knob B located on the top-right side of the adjustment unit to adjust the horizontal roll.
¡ Tighten the bolt A which was loosened using the hexagon wrench (3 mm).
* "C" marks appear on the setting plate to indicate the locations of the bolt and adjustment knob.
y
After adjustment, use the two M5 x 10 mm hexagon socket head cap bolts supplied with the wall
plate to install the left and right cover plates to the wall plate.
Adjustment
knob B
Bolt A
5°
Bolt A
5°
5°
5°
Bolts (M5) x 2 (supplied)
Adjustment knob B
Right side
8