Akyga AK-BC-02 Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Cargador de batería Akyga AK-BC-02. Akyga AK-BC-02 4 páginas.

AK-BC-02 - user manual

When disconnecting the power cord from the socket and from the device, do not pull on the

cord, but only on the part of the cable plug provided for this purpose.

Short-circuiting the current connection is prohibited.

In case of any doubts regarding operation, safety or connection of the product, please contact

the manufacturer or a qualified specialist for this purpose.

All maintenance, adjustment and repair work on the product may only be carried out by a

qualified person in a specialist facility.

Removing the most common problems

Problem

A cell connected to an

electrical outlet via

charger does not charge

Preparing the Battery Charger for Use:

Connect the charger via added power cord to the electrical outlet.

Place the cells in the battery charger in pairs.

Make sure that the cells are correct placed in the charger.

The LED diodes signals that the battery has been charged (charging process - shines bright

red color, after charging - shines pale red color).

After charging the cells, disconnect the charger from the mains socket, then remove the

cells.

Cleaning the power supply

Disconect the power supply from the electrical socket and connected devices before cleaning.

Use soft and antistatic cloth for cleaning the battery charger.

Do not use abrasive or chemical cleaners.

Cause

No mains voltage

The battery charger is

overloaded

Incorrect placement of

the cell in the charger

There is a suspicion of a

product defect

Solution

Check the correct connection of

the charger to the mains socket

Check the mains fuses

Disconnect the charger from the

power network, heck the

correctness of the current

parameters

Place the cell according to the

polarity marked on the charger

Stop using and contact the

seller

p. 3