bolle SAFETY KLASSEE Manual de inicio rápido - Página 2
Navegue en línea o descargue pdf Manual de inicio rápido para Equipos de seguridad bolle SAFETY KLASSEE. bolle SAFETY KLASSEE 2 páginas.
Imprimir páginaKLASSEE
SAFETY AND COMFORT
VERSIONS
MODEL
KLASSEE
Navy blue
LENS MARKING
• Crown = Manufacturer Mark
• Z87+ = Impact rated for Plano product - tested and approved
to ANSI Z87-2+
CORRECTED BASE:
Corrected base : 4
PACKAGING AND EAN13 CODE
Per piece
WARNING: Reproductive Harm – www.P65Warnings.ca.gov
Bollé Safety-USA
2810 Caribou Court, Suite 160
Carlsbad, CA 92010
USA
bollesafety-usa.com
REFERENCES
PXFKLAS401R
PXFKLAS401R
3660740010010
SIZE
FRAME MARKING
55/16
Z87-2+
FRAME MARKING
• Crown = Manufacturer Mark
• Z87+ = Impact rated for Plano product - tested and approved
to ANSI Z87-2+
• Splash/droplet protection = D3
• Nuisance Dust protection = D4
• Fine Dust protection
• Country of origin = Taiwan
ANSI: guaranteed minimum resistance of the protective eyewear against
everyday risks including dropping the protective eyewear onto the ground,
ageing by light exposure, exposure to heat or corrosion etc.
Maximum protection for glasses. Use for high speed
particles at extreme temperatures.
Bollé Safety product approval certificates to ANSI standards
will be sent on request.
CLEANING AND STORAGE
CLEANING : The lenses should be cleaned regularly. Bollé Safety recommends only using
the B-clean lens cleaning system.
MAINTENANCE : Pitted, scratched or damaged lenses must be replaced by replacing the
complete product. If the frame is damaged also replace the complete product. After each
use it is recommended to keep the spectacles or goggles in a microfiber pouch or rigid case.
STORAGE : All products must be stored in a dry and clean environment.
FRAME MATERIALS
TEMPLE LENGTH
131 mm
= D5
CHARACTERISTICS
TR90/GRIFLEX
05/01/2021