DORMA-Glas UNIQUIN Instrucciones de montaje - Página 3

Navegue en línea o descargue pdf Instrucciones de montaje para Mobiliario interior DORMA-Glas UNIQUIN. DORMA-Glas UNIQUIN 20 páginas.

Imprimir página

DORMA-Glas

2.2

Foreseeable misuse

WARNING

Danger to life due to falling glass.

Falling glass can lead to life-threatening injuries.

• Glass should not be suspended.

• Mount glass with at least 2 persons.

• Secure glass using the correct methods.

• Follow correct installation sequence.

• Clamping profiles on the base profile are not load-

bearing.

CAUTION

Risk of injury from falling to a lower floor.

The failure of the unit e.g. through broken glass, can

lead to personal injury, as people could fall to a lower

floor.

• The unit must not be installed as fall protection in

places where there is a risk of falling to a lower floor.

ATTENTION

Risk of damage due to eccentric vertical load.

Attaching eccentric vertical loads to the product can

cause damage.

• Do not attach any eccentric vertical loads to the

product, e.g. by building shelves.

• The product is not suitable for outdoor mounting.

• The product is not suitable for mounting in the vicinity of

showers, saunas, swimming and salt-water bath or rooms in which

chemicals (e.g. chlorine) are used.

Fig. 1

Not suitable for showers, saunas, baths or salt-water baths

2023-08 / 16676

UNIQUIN Mounting profile

WN 059546 45532

Product description

3.1

Example of a UNIQUIN unit

This UNIQUIN unit is an example of a UNIQUIN partition wall

unit. Further combinations with other unit components, e.g. with an

acoustic element or a sliding door are possible.

Fig. 2

Example of a UNIQUIN unit

(1)

Ground profile and cover profile

(2)

Overpanel

(3)

Side panel

(4)

Door frame system

(5)

Glass door

(6)

Lock with door handle set

(7)

Door hinges

3.2

Product variants

There are 3 product variants for use with different glass thicknesses,

see Chapter 3.5.

NOTE

For ceilings with a flatness deviation of more than 15

mm over 10 m, it is recommended to use the 55th

mounting profile for glass thicknesses from 16 to 19

mm.

Product description