BOLTON Windsor Twin Manual de instrucciones de montaje - Página 6

Navegue en línea o descargue pdf Manual de instrucciones de montaje para Mobiliario interior BOLTON Windsor Twin. BOLTON Windsor Twin 8 páginas.

Step 5

Ladder Assembly: Attach Ladder Hooks

(R) using 20MM screws (Q) into the

predrille holes in ladder (G) - 2 places.

Hook the ladder over the side rails in the

upper bunk - secure the ladder to the

inside of the side rail using 20MM screws

(Q) - 2 places

Place Slat Roll (D) on the wooden cleats

of side rails in the upper and lower bunks.

With counter sunk holes in slats up, center

slats between the bed ends. Make sure

the spacing between the bed ends and

first & last slat are less than 3 1/2". Screw

slats to wooden cleats using 30mm wood

screw (K) - in 56 places

Step 6

Insert Wooden Plugs (L) into counter sunk

holes in Bed ends of the upper and lower

structures of bunk to cover hex bolt heads

- 24 places.

Insert Safety Rail Plug (O) into thru hole in

front safety rail. Insert Mushroom Plug

(N) into predrilled holes in top of post of

upper bunk structure - 4 places. NOTE:

Do not use Finials that come with this

bed when configured as a Bunk Bed!!

Place Insert Plug (M) into threaded insert

in bed end (A) of upper structure of bunk

on opposite end of where the front safety

rail is attached.

You are now ready to enjoy your new Bunk Bed from Bolton Furniture

249 Professional Drive, Morrisville, VT

Web Site: www.boltonfurniture.biz