CANTERBURY Z2606 Manual de inicio rápido - Página 5

Navegue en línea o descargue pdf Manual de inicio rápido para Sanitarios CANTERBURY Z2606. CANTERBURY Z2606 10 páginas. Single hole mixer

Installation Instructions

❻

 Check the position on the sink of the tap, then

tighten the nut using a 13mm spanner.

Note: the under deck mounting surface must be flat.

If the mounting surface is irregular, the nut may not

be secured, and the tap will be loose on the sink.

❼



Connect hot and cold water supplies to the flexi

tail hoses.



Ensure all connections are firmly tightened.

Before use



Turn on the Hot and Cold supplies to the tap.



Maximum temperature for Hot water supply to the tapware is 62 °C.



Minimum recommended pressure is 100 kPa — Maximum recommended pressure is 500 kPa.



Check the installation carefully for leaks.



If further building work is to be carried out in the vicinity of the tapware, it should be covered to

prevent paint, adhesive, etc. from damaging the surface.

Further information Phone (03) 9761 4603

Model : Z2606