Akytec PRM-X.1 Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Unidad de control Akytec PRM-X.1. Akytec PRM-X.1 17 páginas. Digital i/o extension module

2 Overview

PRM extension module provides additional inputs and outputs for the basic device PR200. The

module inputs and outputs are controlled by a program running on PR200. To enable control, the

module should be added to the PR200 configuration in ALP (sect. 4).

The module is a passive device and cannot be used without connection with the basic device over

internal bus.

All modifications are designed in a plastic enclosure for DIN rail mounting.

Each PRM module is powered independently of the basic device. The basic device and the modules

can be operated with different supply voltages.

Extension modules of PRM series have been designed and built solely for the intended use

described in this manual, and may only be used accordingly. The technical specifications contained

in this manual must be observed.

The module may be operated only in properly installed condition.

Improper use

Any other use is considered improper. Especially to note:

– This device should not be used for medical devices which receive, control or otherwise affect

human life or physical health.

– The device should not be used in an explosive environment.

– The device should not be used in an atmosphere with chemically active substance.

akytec GmbH - Vahrenwalder Str. 269 A - 30179 Hannover - Germany Tel.: +49 (0) 511 16 59 672–0 - www.akytec.de

Supply voltage

–

230 (94...264) V AC

230

–

24 (19...30) V DC

I/O

–

8 DI, 8 DO

–

4 AI, 4 DO

–

4 AI, 2 AO