Asus TUF B360-PRO GAMING Manual - Página 15

Navegue en línea o descargue pdf Manual para Placa base Asus TUF B360-PRO GAMING. Asus TUF B360-PRO GAMING 40 páginas.

•

Reset button (2-pin RESET)

This 2-pin connector is for the chassis-mounted reset button for system

reboot without turning off the system power.

•

Chassis intrusion connector (2-pin CHASSIS)

This connector is for a chassis-mounted intrusion detection sensor or switch.

Clear RTC RAM (2-pin CLRTC)

This header allows you to clear the CMOS RTC RAM data of the

system setup information such as date, time, and system passwords.

To erase the RTC RAM:

Turn OFF the computer and unplug the power cord.

Use a metal object such as a screwdriver to short the two pins.

Plug the power cord and turn ON the computer.

Hold down the <Del> key during the boot process and enter

BIOS setup to re-enter data.

If the steps above do not help, remove the onboard battery and short the two pins again

to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery.

USB 2.0 connector (10-1 pin USB1114)

Connect a USB module cable to this connector, then install the

module to a slot opening at the back of the system chassis. This

USB connectors comply with USB 2.0 specifications and supports

up to 480Mbps connection speed.

AURA RGB header (4-pin RGB_HEADER)

These connectors are for RGB LED strips.

Serial port connector (10-1 pin COM)

This connector is for a serial (COM) port. Connect the serial port

module cable to this connector, then install the module to a slot

opening at the back of the system chassis.

ASUS TUF B360-PRO GAMING

CLRTC

PIN 1

USB1213

USB1114

PIN 1

COM

PIN 1

1-5