Canton Cantomount U Instrucciones de instalación - Página 3

Navegue en línea o descargue pdf Instrucciones de instalación para Bastidores y soportes Canton Cantomount U. Canton Cantomount U 4 páginas.

Undo the safety screw and slide the metal plate out of the

wall mount.

Use screws (4.5 x 30) and dowels to mount

the metal plate in the desired place on the wall

or ceiling.

Screw the wall mount into the thread holes in the

loudspeaker using the two screws (M6 x 10).

Slide the wall mount back onto the metal plate that is now

fastened to the wall and secure with the safety screw.

Use a hexagonal key to loosen the screw on the ball joint,

position the loudspeaker, then tighten up the screw again.

At the same time, permanently support the speaker by hand.

Installation instructions Cantomount U

Safety bond (optional): To secure the safety bond supplied

first fasten a screw (4.5 x 30) with dowel into the wall.

Then bold a screw (M6 x 10) with washer onto the

threaded hole in the loudspeaker. The safety bond must be

attached in such a way that it allows no fall at all or that the

falling distance is as short as possible. Be careful to ensure

that the safety bond is securely attached at both ends.

Adapter (optional): If the installation angle of the speaker

exceeds +/- 45 degrees you will need to insert an adapter.

For this you will need to use the extralong fastening

screws (4.5 x 55) with dowels.