Advance acoustic SC100 Manuales de instrucciones
Navegue en línea o descargue pdf Manuales de instrucciones para Fregadora Advance acoustic SC100. Advance acoustic SC100 2 páginas.
También para Advance acoustic SC100: Manuales de instrucciones (2 páginas)
Imprimir páginaATTENTION! Do not use the machine before you have read and understood the Instructions for Use Manual.
1. Release the handle to remove the
2. Fill the solution tank with clean
tank assembly.
water, not to exceed 100° F.
6. Press the black pedal to put the
7. Press the start/stop button to start
machine in working position.
the machine.
11. The red LED blinks when the
12. To use the manual suction hose, press
machine is getting low on solution
the main button to start the machine
and has a fixed light when empty.
in upright position. Turn the hose
Empty the recovery tank and
connection to ON and use the suction
refill the solution tank to continue
tube. When done turn hose connection
working.
to OFF. (**)
16. Check and clean the solution and
17. Remove the squeegee bars.
vacuum filter regularly.
(*)
ALWAYS FOLLOW THE DETERGENT DOSING RECOMMENDATION ON THE LABEL OF THE CHEMICAL PRODUCT USED.
(**) THE MANUAL SUCTION HOSE IS INCLUDED ACCESSORY ONLY FOR THE FULL PACKAGE VERSION; FOR THE BASIC VERSION IS AN OPTION.
9435 Winnetka Avenue North
240 Superior Boulevard
Brooklyn Park, MN 55445
Mississauga, Ontario, Canada L5T 2L2
www.advance-us.com
www.nilfisk-advance.ca
Phone 800-850-5559
Phone 800-668-8400
Fax 800-989-6566
Fax 800-263-5111
All manuals and user guides at all-guides.com
OPERATING GUIDELINES
SC100
3. The tank cap can be used for
dosing the detergent. One full cap
is 30 ml giving 1% detergent of the
0.8 gal (3 L) tank capacity. (*)
8. Press one of the solution buttons,
according to the type of cleaning to
be performed:
1 drop - normal cleaning
2 drop - heavy duty cleaning
When finished using
13. Park the machine in the upright
position.
Turn off the machine by pressing
the start/stop button.
Press the main switch to "0".
18. Remove the cylindrical brush by
turning the side knob clockwise.
™
4. Connect the power plug to an
5. Turn on the machine with the main
electrical socket.
9. Move the machine with the handle
10. For double scrubbing, flip the
and start cleaning the floor.
14. Disconnect the power plug from
15. Empty the recovery and solution
the electrical socket and rewind
the cord starting at the machine
and place it in the cord holder.
19. Clean the squeegee bars and
20. Wipe down the machine using a
the cylindrical brush with water.
Check for wear and replace when
necessary.
switch to "I".
pedal to lift/lower squeegees.
tank. Clean them with water.
damp cloth, and where needed
use a neutral cleaning product.
Then store the machine in a clean
and dry place.